IDRS PC Based DVRs IDRS-6000S-HE Server User Manual Beijing Backbone Computer Technology Co.,Ltd Tel: 86-10-62975811 Fax: 86-10-62979244 www.chinasecuritysystem.
IDRS-6000S-HE Series PC Based DVRs user Manual Contents INTRODUCTIONS ................................................................................................................................ 4 SYSTEM FEATURES............................................................................................................................ 4 IMPORTANT INFORMATION ........................................................................................................... 5 RECOMMENDED SYSTEM REQUIREMENTS ....
IDRS-6000S-HE Series PC Based DVRs user Manual 3.5.2 E-Mail setup ......................................................................................................................... 46 3.6 DIGITAL MATRIX SETUP ................................................................................................................. 47 3.6.1 Matrix setup .......................................................................................................................... 47 3.6.2 Display setup .............
IDRS-6000S-HE Series PC Based DVRs user Manual 6.3 LOCAL SEARCH .............................................................................................................................. 79 6.3.1 Display setup and data information ..................................................................................... 79 6.3.2 Playing operation area ......................................................................................................... 79 6.4 REMOTE SEARCH ...............................
IDRS-6000S-HE Series PC Based DVRs user Manual Introductions Thank you for purchasing our IDRS DVR system. This operation manual is to introduce how to set DVR system and explain each function of DVR system for you to use the system effectively and stably. Operators should go through this manual thoroughly before you install/utilize this DVR system. You can get this manual from your dealer or contact us directly. System features • Hardware support H.
IDRS-6000S-HE Series PC Based DVRs user Manual • Backup & burn CD directly • Remote talking between server and client or server and server Important Information For optimal performance of your system, it is important to follow these recommendations. 1. We recommend that you divide your hard disk into two partitions (E.g. C and D :) at least. The first partition is used to install Windows OS and system software, the other for storing record files. 2. Please use appropriate motherboard and display card.
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 1 Installation 1.1 System installment and hard disk district Take a hard disk as the example 1) Establishes main district C: (3GB) (operating system & application software.) 2) Establishes expansions district (is left over hard disk 100%).
IDRS-6000S-HE Series PC Based DVRs user Manual 10) Installs Directx8.0 or a higher edition.
IDRS-6000S-HE Series PC Based DVRs user Manual 1.2 Installs DVR Cards driver If you first install the card or upgrade the PC Based DVR software, you should install or update the card driver. The steps are as follows: 1) Double-click the driver installation program “DriverInstall.exe”, a dialog will display. Figure 1:Double-Click “DriverInstall.exe” 2) Click “Install” to install drivers. When it informs that all drivers have been installed successfully, you can click “OK” button to exit the program.
IDRS-6000S-HE Series PC Based DVRs user Manual 3) After the Drivers has been installed. When we open the Device Manager, we will see the following window. “H.264 IDRS-60xxES CARD” sign driver has been installed successfully. Each card DSP chipset will own one driver here. Figure 3: Check drivers had been installed 1.3 Install DVR Server software Find the files of IDRS DVR Sever and open it and double click the SETUP.EXE.
IDRS-6000S-HE Series PC Based DVRs user Manual Confirm the installation information, then click “NEXT”, after the installation process completed, Click “FINISH”. If it is successful, the desk will popup automatically a button , please double click this icon, you can start to use this software.
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 2 Start up and Main Interface 2.1 Start up 1) Before you run DVR server, please check all connectors are firmly connected. 2) By default, DVR Server application will run and initialize cards automatically (total time is determined by the number of channel, about 4-10s). Otherwise, you should Left-Double-Click shortcut icon to start it.
IDRS-6000S-HE Series PC Based DVRs user Manual 2.2 Main Interface 2.2.1 Show tips 1. When the mouse moves closely or stops above a button, a text tip will be shown to interpret the function of it immediately. 2. Zoom in/out video image: Left-Double-Click a camera window to zoom in/out video image (or press F11 on the keyboard). 3. System will detect cards and read the total number automatically, and the corresponding number buttons will be displayed dynamically. 4. Recording status: a.
IDRS-6000S-HE Series PC Based DVRs user Manual and then system will play back video data in current window according to your selection. The window that is playing back video data will indicate a yellow border to be different from the live windows. In the course of the instant playback, you can press “Space” key to switch the play/pause status or direction key “→” and “←”to play next and previous frame.
IDRS-6000S-HE Series PC Based DVRs user Manual 2.2.2.4 OSD Adjustment Single-Right-Click video image area in main interface and select “OSD Adjustment” to adjust the position of OSD (IP Camera does not have this function; you can set the OSD position in IP Camera setup remotely). OSD includes time and channel name.
IDRS-6000S-HE Series PC Based DVRs user Manual button to save and press button to resume time and channel name to default position. 2.2.2.5 IP Camera setup For this function, it is only available when you Right-single-Click image of IP camera. It will describe in details in IP Camera Setup. 2.2.2.
IDRS-6000S-HE Series PC Based DVRs user Manual current record disk and description of selected camera 2.2.3.2 Partition mode Press button to set the window’s partition mode of the main screen. There are many types partition; the available partition is determined by the total channels of card, you can select the suitable partition according to the number of video inputs, the partition number which is bigger than total channel is not available with gray. 2.2.3.
IDRS-6000S-HE Series PC Based DVRs user Manual 2.2.3.6 Motion detection area & Cover setup Press button to Motion detection area & Cover setup. This function allow user to set the built-in motion detection. By default, the entire screen is set as motion detection area where is indicated with green border around the image. To mask a specific area, you can click button to cancel the full screen detection border; then Left-Single-Click and drag a rectangle. A green rectangle will mark the area of it.
IDRS-6000S-HE Series PC Based DVRs user Manual Press button to delete all cover areas. 2.2.3.7 View system log Press button to system log. This function allow user to view all actions of recording as well as operations. System log keeps a record of system events such as program startup and shutdown, changing camera setup and all Operator or System daily activities according to time and date. Users can look log by date and system parameters.
IDRS-6000S-HE Series PC Based DVRs user Manual Figure1— 1 If it is set to appear automatically, when the sensor is touched, the map will appear automatically and the sensor being touched will be marked 2.2.3.9 Local setup submenu Press button to enter Local setup submenu. 2.2.3.10 Playback submenu Press button to enter Playback submenu to search local video/audio data. 2.2.3.11 System lock Press button to prevent unauthorized user to operate system.
IDRS-6000S-HE Series PC Based DVRs user Manual button again; the unlock dialog box will be displayed. Input your User ID and password then press OK to unlock it. Default User ID is “admin”, no password. Note: If the DVR system is not configured as User Manage Mode, the lock button will be unusable and allow any client’s access (even in client program, user name and password will be useless) 2.2.3.12 Remote chatting Press button will popup remote chatting interface.
IDRS-6000S-HE Series PC Based DVRs user Manual 2.2.3.13 Minimize button Press button to minimize the main window (or press WIN + Z on keyboard). 2.2.3.14 Exit program Press button to exit program. After clicking this button, a dialog will display. Click “OK” to quit DVR system. 2.2.4 System Menu Press to list other functions 2.2.4.1 Backup System Parameters Select this function to export system configurations.
IDRS-6000S-HE Series PC Based DVRs user Manual 2.2.4.2 Import System Parameters Select this function to import system configurations. 2.2.4.3 DVD/CD Disc backup directly Select this function to burn video data to CD, it is same to burn CD function in Playback and burn DVD 2.2.4.4 Execute a external program Select this function to execute an external program 2.2.4.5 Write working log This is useful to record events that occur during the operator’s shift. 2.2.4.
IDRS-6000S-HE Series PC Based DVRs user Manual (1) Add IP camera device Press button to add an IP Camera device: [Server Name] Set a name for the new IP camera device. [IP Address] Input the address of the IP Camera, it is an IP address or IP alias of an IP camera which is connected through DNS Server.
IDRS-6000S-HE Series PC Based DVRs user Manual the user has no right to visit that camera, the connection will be cut down automatically. [If use DNS to get IP] Select whether use DNS to get IP or not, if the server end is the dynamic IP address, users need use DNS to get the IP of the server. [DNS Server IP] Set IP address of DNS server host. [DNS Server Port] The port of DNS server host, which is provide to connect DNS software.
IDRS-6000S-HE Series PC Based DVRs user Manual Information of network adapter IP address of the system Subnet Mask Net Gate When client is linked, its IP address will display in this window (the current IP only). 2.2.6 PTZ Control panel Press button to control PTZ. 2.2.6.1 Common PTZ control [Relay] (On/Off): Control the PTZ cameras internal relay (relay1) or the decoder’s relay (relay 1). Used to turn on a light or control an access gate.
IDRS-6000S-HE Series PC Based DVRs user Manual [Focus + / Focus –]: Overrides the auto-focus setting of the PTZ camera, adjust focus the image. [Iris + / Iris –]: Overrides the PTZ cameras auto-iris and brighten or darken the image. By press and holding these buttons, the PTZ camera is moved up, down, right and left as well as other directions. Pressing this button initiates the connected PTZ camera to do an automatic tour of 360°. 2.2.6.
IDRS-6000S-HE Series PC Based DVRs user Manual Here to adjust the speed of platform Preset setup: firstly, put the name you want to call in Preset Name. Secondly, you can select the No in Preset No. Call Mode will make you select the order for preset “call” or to add this present, “setup”. Then click then, this position can be displayed on the bellowed list. If you want to delete some presets, first select it then click .
IDRS-6000S-HE Series PC Based DVRs user Manual (2) Preset call：Let the mouse suspend on this area, there will auto popup the list of presets, then click the No. of preset needed to call on the list. (3) Preset tour：Let the mouse suspend on this area, there will auto popup the list of tour plan, and then click the No. of tour plan on the list. 2.2.7 Control PTZ via video window On the Image 3, each rectangle area is the effective area of every action. Arrow denotes the direction of the action.
IDRS-6000S-HE Series PC Based DVRs user Manual 2.2.9 Color and Audio adjustment ① P ress the first button and drag to adjust the brightness of the image that you selected, and you Increase can resume its default value by pressing . ②P ress the second button and drag it to adjust the contrast of the image that you selected and you can Increase resume its default value by pressing . ③P ress the third button and drag it to adjust the hue of the image that you selected, and you can resume .
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 3 Click Local setup in the main system screen to enter the DVR local system setup. It includes 7 types configuration setup (in the bottom of the interface): System setup Camera setup Sensor setup PTZ & linkage setup Email setup Matrix & display setup Password setup 3.1 System setup 3.1.1 System setup [Number of Channels] Display total channels of local board card, the number of IP Camera are not included.
IDRS-6000S-HE Series PC Based DVRs user Manual [Sensor Input(DI)] Display number of sensors (DI). [Sensor output(DO)] Display the number of alarms(DO). [Audio Monitoring] Select real-time monitoring audio or not [Use E-Map] Select use Electron Map or not [Camera sequencing interval] Set auto-split changing interval time. [DI/DO Port] Select sensor/alarm driver connecting port, it must be different from PTZ Port. If you do not use alarm input, you can close this function.
IDRS-6000S-HE Series PC Based DVRs user Manual connect parallel with each other. [Date Format] Select the way to display date. It decides the date display mode of DVR system, including the information panel on the main screen, the date panel of the playback window and OSD date in video. [Alarm Beep] Select disable or enable from drop-down list. If select “enable”, when there is an alarm, system will make beep voice. [Time Format] Select time format from the drop-list.
IDRS-6000S-HE Series PC Based DVRs user Manual [Use DNS] Select use DNS or not, support dynamic IP. [Local Host Name] Input the name description for DNS Server identification. [DNS Server IP] DNS server host IP. [DNS Connection Port] DNS server host port ,it is used to connect DNS server. DNS server work mode: If it is require, please get DNS server software from developer. 1. If your DVR is dynamic IP, you should set your DVR system as follow: 2.
IDRS-6000S-HE Series PC Based DVRs user Manual 3. NVR Clients get IP of DVR through DNS server according to its domain. 4. NVR Clients visit DVR through the IP that get from DNS server. [Interval Connection Time] Set the interval time to connect DNS automatically. [Permit Max Connect Video Num] The maximum number of video that permit to the client to connect the DVR server. The number can select according to the network bandwidth. The maximum is 256.
IDRS-6000S-HE Series PC Based DVRs user Manual 3.2 Camera setup 3.2.1 Camera setup [Selected Camera] To set the parameters for a camera, select the camera from the drop-down list. The cameras you can select are only the cameras of the local board card, IP Cameras are not included. For IP Camera, you should set it remotely in IP Camera setup. [Camera Description] Input the description for easy identification.
IDRS-6000S-HE Series PC Based DVRs user Manual In many cases, this limits detail (resolution). The benefit of CBR is its ability to accurately estimate the total video capacity. [Frame Rate(fps)] Set the recording rate for selected camera. For Frames per Second (fps), the frame rate should be from 1 to 30 fps. While image size is set “704*576”, the frame rate should be set around 1 to 15 frame. [Remote Image size] Select image resolution to be transmitted to clients.
IDRS-6000S-HE Series PC Based DVRs user Manual For D1: Maxbps = (Maxbps/3)*8 same configuration (I P B) Note: Maxbps is the CIF’s value with the [Alarm Adjust fps] Select enable or disable, If select “enable”, when alarm occurred, the camera will record with real-time frame rate(25fps or 30fps) ,even though [Frame Rate(fps)] has been set other values(eg:5fps). [Remote Quality] Set the image quality of the clients to be recorded from Poorest, Poor, Medium, Very good and Best.
IDRS-6000S-HE Series PC Based DVRs user Manual [Masking Bitmap File] Watermark function ,the logo picture must be edited ad 128*128 pixels file size and saved as bmp format. [Record Days] This section allows users to determine how long the record data of each camera should be kept by the system. The maximum duration for on-line storage is 120 days. Users can select exact number of days, or can select “auto” mode.
IDRS-6000S-HE Series PC Based DVRs user Manual resolution is set as others (except “704*576(12fps)”), if Remote image size is set as “Same as Rec”, Remote frame rate (fps) and Remote Quality are no effects, the client’s parameters will be same as server. 6.
IDRS-6000S-HE Series PC Based DVRs user Manual Tips: One block of pane means half an hour. Firstly click record mode icon , then click schedule diagram, hold down the mouse and move it to select large area (Drag & Drop). 1) Normal Record (Green): DVR System is always recording video. (e.g. Sun. Fri. Sat.) 2) Motion Detect (Blue): DVR System begins to record video only when it detect moving object. (E.g. Mon.) Click "Motion Detect" icon, then select your schedule time by drag & drop.
IDRS-6000S-HE Series PC Based DVRs user Manual 3.3 Sensor setup 3.3.1 Sensor setup [Select Sensor] Select the sensor from the drop-down list in order to set the parameters for it. [Sensor] Select this sensor port to use or not. [Sensor Position] Enter the description for easy identification. [Activate PTZ Preset] Select linkage of Speed Dome preset number. Speed Dome will move to this preset number automatically when there is an alarm. (Speed Dome installation needed).
IDRS-6000S-HE Series PC Based DVRs user Manual [Sensor Type] Select NC or NO alarm type. [Alarm Write log] Select write alarm log or not. [Alarm Action After It Times-Out] Select system alarm linkage mode when an alarm stops. “Stop Immediately” means the system stop alarm immediately after the alarm driver stops an alarm. “Do Not Stop” means the system don’t stop alarm after the alarm driver stops an alarm. “Wait” means the system will stop alarm at your setting time after the alarm driver stops an alarm.
IDRS-6000S-HE Series PC Based DVRs user Manual 3.4 PTZ & Linkage setup 3.4.1 PTZ protocol setup [Selected Camera] Select the camera from the drop-down list to be set the parameters. The cameras just include the cameras of local board card; IP Cameras are not included. For IP Camera, you should set it remotely in IP Camera setup. [PTZ Port] Select PTZ connecting port, when you do not use PTZ port, please choose “------”.
IDRS-6000S-HE Series PC Based DVRs user Manual 1. PTZ position will influence PTZ control. E.g.: if you set it as obverse and press left, then it will turn left. If you set it as inverse and press left, then it will turn right. 2. If there is (H) after the PTZ protocol, it has the high speed of Preset function. If there is no (H), it only has ordinary functions. 3. The PTZ address will be sent as a message option. Take care that some address begins from 0.
IDRS-6000S-HE Series PC Based DVRs user Manual Loss alarm in specified time. 2) Motion Alarm (Blue): DVR System only responds with Motion Detection alarm in specified time. 3) Video Loss (Yellow): DVR System only responds with Video Loss alarm in specified time. 4) Not check (gray): DVR System not respond with any alarms in specified time. Note: Check Alarm Setup (including Motion & Video Loss, Motion Alarm and Video Loss) does not take affection to Motion Detect Record. It is only alarm setup.
IDRS-6000S-HE Series PC Based DVRs user Manual 3.5.1 SMTP setup [SMPT Server] SMTP server address, e.g.: mail.jstDVR.com, [SMPT Port] SMTP listen port for connect request of TCP. [Auth. Type] Logon mailbox, operator will select SMTP authentic type. Or select “simple login”. [Login User ID] User ID of mailbox [Login Pass] Password of mailbox After user setup finished, you can press to test the function. 3.5.2 E-Mail setup [Send To] Set address of receiver.
IDRS-6000S-HE Series PC Based DVRs user Manual [Send Notification from Cameras (Screenshot From Alarm Camera)] Operator can select the cameras, which will trigger to send E-mail when they have alarms. The cameras you can select are only the cameras of the local board card, IP Cameras are not included. [Send Notification from Sensors (Screenshot From Linked Camera)] Operator can select the sensor, which will trigger to send E-mail when they have alarms.
IDRS-6000S-HE Series PC Based DVRs user Manual [Video View Mode]Select video output display mode, there are 1split 4split , 9split , 13split and 16 split , 2split , . [Video Window][Display Video Camera in window] After selecting video split mode, there will have corresponding display video window, select one camera or several cameras to show in the window. For IP cameras, system use hard decoding, total channels of them are influenced by decoding channels.
IDRS-6000S-HE Series PC Based DVRs user Manual 3.7 Password setup 3.7.1 User information [Local Password] Check to enable User Manage mode for local PC DVR, and activate the lock button in main window. Only authorized user can log into DG System at User Manage Mode. [Auto lock time] Select a time to enable system to lock automatically when there have no actions after this time. [Network Password] Check to enable User Manage mode for Client.
IDRS-6000S-HE Series PC Based DVRs user Manual [New User] Press button to edit the user you want to add in the [User Name] blank. Input User Name, Note Name, Password, and Confirm Password. Select Manage Right (Administrator or Operator), and then click Add User to save. [Add User] Up to15 users can be added to system except Admin. Click icon to add new user you edited to user list. [Modify User] Select a user from user list, then click button to modify it.
IDRS-6000S-HE Series PC Based DVRs user Manual [Setup Right] Select setup rights to grant or deny user privileges.
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 4 IP Camera Setup Note: For IP camera setup, its alarm and related setup is only be available when you set remotely, the Local setup of PC DVR is not available for IP Cameras except Recording Schedule in Camera Setup 4.1 Functional buttons There are 5 buttons in each page. They are Upgrade, Restart, Time adjustment, Save and Exit. The system can upgrade to the server remote. Click this button, and select the right file.
IDRS-6000S-HE Series PC Based DVRs user Manual In the server window, some blanks’ background are gray. Those parameters are read from foreside server, you can’t modify them. Other blanks whose background is white, you can set them remotely. Enter the name description for easy identification. This name delegates the foreside server. If use DNS to get IP, this name will be used. IP configuration and related: These are network configuration; you can set LAN or Internet IP according to your need.
IDRS-6000S-HE Series PC Based DVRs user Manual foreside server 4.3 Channel setup Press button to set channel parameters. This section contains the parameters to designate a name for every camera connected, to enable or disable show LOGO and OSD, and to set display type of OSD & LOGO as well as record resolution, record type, record quality and frame rate, etc. [Camera] Select the camera to be set from the drop- list. [Camera Name] Enter a name description for easy identification.
IDRS-6000S-HE Series PC Based DVRs user Manual VBR range= Poorest, Poor, Medium, Good, Best. FBR range = 45 Megabytes/Hour to 400 Megabytes/Hour. [Max Bit Rate] Select the maximum bit rate for Variable Bit Rate (VBR) record. [Show LOGO/ OSD/ Week] If you check those boxes, system will show corresponding information on screen. [Position] Set the position of OSD or Logo by entering the X and Y coordinate directly. [OSD]Set the display attribute of the OSD & LOGO.
IDRS-6000S-HE Series PC Based DVRs user Manual In this screen, you can define the PTZ protocol and set the Preset Position as well as the plan to execute them automatically. [Camera] Select the camera to be set from the drop- list. [Baud rate] Set baud rate according to PTZ protocol from the drop- list. [PTZ Protocol] Select the communication protocol for the PTZ camera from drop-list. [PTZ Address] Set the address of the decoder, which must be matched with the value of dipswitch in the PTZ.
IDRS-6000S-HE Series PC Based DVRs user Manual [Sensor NO] Select one sensor to be set. [Sensor Name] Enter the name description of the sensor. [Type] Select alarm type (sensor type) from “NO” (Normally Open) or “NC” (Normally Close) [Policy] Selecting “Sensor Alarm Handling” firstly, handling policies will be available as follows: Audible warning—Indicate the alarm with voice. Upload to DVR server—Update the alarm information to center. Trigger alarm out—Trigger alarm box to output the alarm.
IDRS-6000S-HE Series PC Based DVRs user Manual [Copy to] After finishing one channel, if you want to set any other channels’ configuration as the same as this camera, you can select channel number from drop-list, and press button. 4.6 Alarm setup Press button to set alarm parameters.
IDRS-6000S-HE Series PC Based DVRs user Manual [Camera] Select a camera to be set from the drop-list and you can copy the configuration to the other cameras by clicking copy button. [Alarm Type] Select alarm type: Motion detection, Tempering alarm and Video Loss. [Level] Select sensibility levels from 0 (the lowest level) to 5 (the highest level) for the alarm [Set motion detection areas] Left-click mouse and drag it on the screen to select motion detect area, you can select the whole area or many areas.
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 5 Playback 5.1 Main interface Click button in main interface to enter playback interface.
IDRS-6000S-HE Series PC Based DVRs user Manual 5.2 Select playback channel 5.2.1 Select date Select one window (the 1st one in default), and then click button to show the date. The blue dates contain recorded data. The green date is the current date. The gray dates signify no data. Only those blue ones can be selected and when they are selected the camera window will appear automatically to show which cameras has record data. Click or to change month and year of search data. 5.2.
IDRS-6000S-HE Series PC Based DVRs user Manual 5.2.3 Select file After selecting the camera to play user can click button to show all the files of this camera. In default, system will play back video file from the first one. In this screen you can change the file you want to play by clicking it directly. The camera list below the window will show the recorded data of the day you select.
IDRS-6000S-HE Series PC Based DVRs user Manual Right click the picture to perform digital zoom function. Different color will show information of all cameras. You can see all kinds of record, their time and length according to recorded data. 5.3 Play file and related operations Press this button to set partition mode of Window, There are 1, 4, 9and 16 splits. To reduce the load of CPU and get best effect, you should select the partition mode according to the record channels amount and resolution.
IDRS-6000S-HE Series PC Based DVRs user Manual / Previous / Next frame: press this two buttons to look previous or next frame. Reverse play: press this button continuously to play video reversely, the speed is determined by the following playing speed adjustment bar. / Play/Pause: This button will alternate between Play and Pause. When it is playing, it will show and press it to stop, and then the button will show you select reverse playing, it will show . When to play by pressing it.
IDRS-6000S-HE Series PC Based DVRs user Manual save path. Note: The size of the image is that of the playing window. 5.5 Create clip file Click button , there are three items to be selected as below. 5.5.1 Create file clip Press to create file clip. [Select channel and save path] Select channel and save path of the backup file on the top of interface.
IDRS-6000S-HE Series PC Based DVRs user Manual to [Play control button] User can press and drag slider on control the player time. [Beginning and stop position setup] After you select a time, press button to set it as the beginning time, and then drag the bar to select another time and press button to set it as the end time. When you finished, the file attribute on the left will show the size of the file to be created.
IDRS-6000S-HE Series PC Based DVRs user Manual [Backup Path] Select path for the backup file, User can backup record file to CD. [Backup Camera] Select the backup camera. User can select more than one camera at one time. [Select begin time] [Select end time] Select the beginning time and end time of the file to backup. It can backup the data feature and remove file unite function when backup, so that backup procedure is faster. button to show its total value.
IDRS-6000S-HE Series PC Based DVRs user Manual 2. Check the backup file value. 3. Backup the file to the temporary file in the last volume if there have enough free space. Otherwise, write backup file to the last second volume. 4. Write data to buffer 5. Write CD. 6. Delete buffer and temporary file.
IDRS-6000S-HE Series PC Based DVRs user Manual 5.5.3 View Backup file [Select channel and path] Select channel and path of the backup file in local disk on the top of interface. The file in this path will show in file list in the left of interface. [Play file and related operations] The most operations in this interface are same as Create file clip in Create clip file it adds any other functions as follow: ①Delete file Press button to delete current file.
IDRS-6000S-HE Series PC Based DVRs user Manual Figure 5— 1 Area ①: File List. Area ②: The File directory and list of will be burned to CD.
IDRS-6000S-HE Series PC Based DVRs user Manual You can select the document or file need to be added, then click “Open” button, the selected document or file will be added in the file list at the area ①. Delete the added files. Select some file in the document list at area ①, and then click this button, this selected file will be deleted from burned files (including the sub-file and all of documents) Erase CD. If the Disk is erasable, the data of the disc can be deleted by clicking this button.
IDRS-6000S-HE Series PC Based DVRs user Manual Figure 5— 2 1. Select pictures from directory and file list You can select a captured picture from directory list (Figure 5— 3) and file list (Figure 5— 4) in local disk. By default, the directory is: System volume\Grab\Search. After you select the path the file name will show in the top of the window (Figure 5— 5).
IDRS-6000S-HE Series PC Based DVRs user Manual Note: Figure 5— 6 show name and path of current picture. If you want to save the reworked picture in another file, you can change its name and path here, with bmp and jpg as suffix. Then click the button . 2. Related operations 1) After you edit the picture you can save the picture in a save path as you like. 2) Function buttons of picture disposal. 3) When the result of disposal is not good click it to the default.
IDRS-6000S-HE Series PC Based DVRs user Manual Click or to change month and year of search data. 5.8 Camera status Click button to show the cameras state. If the number is bright, it means there has record data in this channel. 5.8.1 Synchronic play Click button to synchronize all playback channels time. 5.8.2 Smart search 5.8.2.
IDRS-6000S-HE Series PC Based DVRs user Manual occurred within this area from previous 3 seconds to next 3 seconds when the motion occurred. Pressing this button again will end smart search. Note: 1. Press synchronic button while smart search is running, system will end smart search. 2. The sensitivity of the smart search is same as motion detection. If you set a high sensitivity, system will search even that there is no motion in specified area.
IDRS-6000S-HE Series PC Based DVRs user Manual quarter of the image will be enlarge. By thereafter, single click right mouse button on the image, it will resume the normal. Adjust the voice; click the button to clear the voice. Adjust playing speed; click the button to resume normal playing speed. Note: 1. It is not suggested that multi-channel (more than 10 channels) record and playback coinstantaneous unless your PC has a wonderful configuration, because the data throughput of HDD is huge.
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 6 IE client The client user can view video of DVR Server through Internet Explorer, The default web server port is 80; if user changes it to other port, user should add this port number after domain name when visit the video of Server through Internet Explorer. E.g.: http://192.168.0.119:1160. 6.
IDRS-6000S-HE Series PC Based DVRs user Manual 6.2.1 Connection operations Press will connect the DVR Server’s camera video from and press will disconnect all connections. If DVR Server’s channel is more than channels that you selected partition mode, you can use DVR Server’s video in sequence. Pressing button button to display will switch full screen mode and Right-Single-Click image can back to normal mode. 6.2.
IDRS-6000S-HE Series PC Based DVRs user Manual 6.2.5 Quit program Press button to shut down the IE Client. 6.3 Local search Press button to enter local search: Display setup and data information Playing operation area 6.3.1 Display setup and data information In this area, you can select display partition mode, date, video channel and its video file named according to time. 6.3.
IDRS-6000S-HE Series PC Based DVRs user Manual to adjust video-playing time [Playing-control buttons] Play, Pause, Stop. [Single frame play] Previous frame, next frame [Playing speed control] Slowly play Fleetly play 6.4 Remote search Most functions and operations of Remote search are same as playback; different feature is that remote search added download feature button, system will save When you playback remotely, you click video of current channel you selected.
IDRS-6000S-HE Series PC Based DVRs user Manual download fast. NOTE: When user use IE client to visit DVR server, If connect successfully, there will appear four partition blue window. If connect unsuccessfully, the reasons possibly are: ①. The Web server port has been used by other programs. ②. Your computer didn’t download the player plug normally. The reason may be the jurisdiction of your computer is too high, or your computer has plug filter.
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 7 Mobile Client 7.1 Recommended Mobile Phone Requirements 1) Before you run Mobile Client, please check if your mobile phone supports JAVA and comply with following applicable standards: CLDC version: CLDC-1.0 MIDP version: MIDP-2.0 2) Your mobile telephone should have GPRS or CDMA to transport data. 3) Set Internet as the access point of your phone call.
IDRS-6000S-HE Series PC Based DVRs user Manual phone connect with Internet correctly. 7.3 Install and using 7.3.1 Installation You can install the mobile client as install java games in your smart phone, install mobile client in your smart phone directly (downloaded the program in WAN or LAN) or use the application supplied by the manufacture of your smart phone to install mobile client. 7.3.
IDRS-6000S-HE Series PC Based DVRs user Manual Press ”Login” button to connect the DVR server. 7.3.4 Camera List The Mobile DVR will enter the Camera List after you connect the DVR server successfully. Select the Camera you want to browse and press the “preview” button to get the image from the server.
IDRS-6000S-HE Series PC Based DVRs user Manual 7.3.5 PTZ control → Press the “Options” button and select the “PTZ” button to enter the PTZ control interface. [Orientation control] Select the button and press “OK”, it will change into . After that, by pressing and holding the up, down, right and left buttons, the PTZ camera will move up, down, right and left. Note: Please try “5”button on your phone if pressing “OK” does not work. [Zoom + / Zoom –] Control the zoom function of the PTZ camera.
IDRS-6000S-HE Series PC Based DVRs user Manual Chapter 8 Appendixes Appendix A: Fast key reference Please refer to shortcuts keyboard setup This color key denotes PTZ control. This color key is other function control.
IDRS-6000S-HE Series PC Based DVRs user Manual Page UP Previous screen F9 All cameras recording 30 Sec emergency F11 Zoom in/out the single camera view F12 Switch to Full screen mode (Equivalent to pressing space key except Instant Playback mode) Ctrl + 0 Enter playback Ctrl + 1-9 Instant playback minutes Shift + 1-8 Select screen partition 1,4,9,16,25,36,49,64 WIN+ Z Minimize the Main System window Appendix B: How to use “Copy File” folder.
IDRS-6000S-HE Series PC Based DVRs user Manual Appendix C: Audio preview connect the card use the cable, as follows: NOTE: Sometimes there is no preview sound, Solution: double click the volume control of in the taskbar, open the properties dialog box, and check AUX control.
