User manual

IDRS IP Camera IE Client User Manual
6 / 30
4. IP Camera(or DVS) to IE connection &
operation
4.1 First time installation with Plug-in
When you want to connect to the network camera, only need to input the network camera's IP address in
the IE Address bar, then click the "link" or the "Enter" button on the keyboard.
If it is your first time to access to the network cameras through the IE browser, the operating system will
prompt you to install a plug-in, as the following picture: (Take Windows XP-as the example, basically
similar to other operating systems.)
Click to install this Active X. You need to wait different time according to different net
speed. (Usually between 20-120 sec)
After installation, the page will automatically enter into the user interface to verify the users,
Inputs the corresponding connects port, the user name and password, and selects the suitable stream
type (Master Stream, Sub Stream. See more information: 4.3.1), after all this, click OK, and then enter
the main browser interface, as below:
Default admin name：Admin
Default admin password：12345
Default connect port：8000