User manual

IDRS IP Camera IE Client User Manual
5 / 30
3. IP search & set
In the network camera software packages, there is a "search software SADP of IP Camera" folder,
including SADP software. SADP software is used to identify and configure all the cameras’ IP address
and mask address in the LAN (must be in an open state). SADP software uses unique search activated
equipment technology, when the user does not know or has forgotten network camera's IP address, can
find it via SADP software. This software can be run in Windows2000/XP system, and needed the support
from the operation of Wincap; users need to install software Wincap Package, The packages include
"WinPcap_3_1_beta_3" software.
SADP is not needed to be installed, can be run directly, the software will automatically search IP
cameras in the LAN after running, then displayed the cameras in the table form, as below: Initiative
IP address: 123.127.244.165
Here you can change the current equipment’s IP address and mask address, then input the one you
want, after that, click .
Note:
The new IP address will take effect after restarting this equipment.
Display the IP address; connect port and
Hardware series number of equipments
searched out