User manual

IDRS IP Camera IE Client User Manual
18 / 30
Select video channel trigger: the trigger-channel video channel can be a can also be a number.
Set up to deal with the alarm: the choice of channel output linkage approach, you can select one or
more of the warning means.
Finished the setup, click "OK."Save the set up and come out the interface, not need to save click the
“cancel”, return to the control parameters setup interface
OSD attributes: can choose whether or not to display OSD, show the location, it shows the week, OSD
attributes (state show that: do not blink opaque, not transparent and blinking, blinking and transparency,
opaque blink, do not show), OSD type (Display format: XXXX - XX-XX (date), XX-XX-XXXXX (on
Japan-year), XXXX in XX on XX day, XX, XX on XXXX in, XX-XX-XXXX (in the sun), XX, XX on XXXX ).
Set channel name attribute: You can choose whether or not to display name of the channel as well as
the location of the show.
Superposition characters: can choose characters superimposed images, stacking up to 4 lines of 22
characters per line (44 characters).
Finished setting Parameter, click "OK." If the parameter can take effect only by restart click the "Restart"
button.
(Note: regular video, mobile detection, video loss, block, block the view of the alarm settings in the
name of the channel information and can not be copied to other channels)
4.3.3 Serial parameters set up
Choose the "serial parameters" in the remote set up, as the following chart
The interface can set up the RS232 and RS485‘s relevant parameters