User manual

IDRS IP Camera IE Client User Manual
16 / 30
Select timing record mode, set relevant period. If select 24-hours record, only can set record type.
Setting finishes, press “OK” for saving then exits configuration interface. When configuration is
unnecessary
Note: If set up the record method mobile detection or alarm video, and we should set up the mobile
detection and alarm deployment.
Pre-recorded time: the video took place before the alarm time, the options do not have to deal with, 5
seconds (default), 10 seconds, 15 seconds, 20 seconds, 25 seconds, 30 seconds, without restriction.
Delay Video: Video alarm occurs when the number of recorded time, there are options for 5 seconds, 10
seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes.
Mobile detection, video loss, blocks the view of the alarm, video cover:
Select the required set of options, you can set the region, deployment time and the way linked. Click "set
the region," come into the interface, as the following chart:
Display area: select "display area", will be able to view the original settings of the region
Regional settings: select "set up regional", holding down the【Ctrl】 keyboard keys, use the mouse to
set up regional location, at the same time hold down the left mouse button and drag the mouse, you can