User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 74
2) Cover Alarm:
When the cameras are covered on illegal purposes, the detector will send the alarm
signal.
The cover range can be set, but only can be one. The sensitivity also can be set and
tested after that.
3) Signal Lost:
Whatever any reason, the warning signal will be sent only if the video signal is not
connected.
The bigger number, the more sensible the motion detects.
[Policy] check “Handling current alarm” first, handling policies will be available as
follows:
On screen warning—Display the alarm information on the monitor
Audible warning—Indicate the alarm with voice.
Upload to DVR server—Update the alarm information to center.
Trigger alarm out—Trigger alarm box to output the alarm.
Trigger alarm record —Set cameras to record triggered by the alarm. You can select one
or more channels. When there is alarm input, the cameras will be triggered to record (the
record type of the channel is Alarm Record), and the monitor will switch to preview the
cameras (warning on monitor is enable).
7.4.6.2 DI Time schedule
Set up DI time schedule. When front equipment and other
alarm devices were triggered, the network camera will
automatically decide whether it is within the DI time
period. If is, the network camera will deal with the alarm
signal of detector in accordance with the preset protocol;
if not, the network camera will not deal with that. You can
copy the DI schedule to other dates.