User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 73
Set up DI time schedule. When front
equipment and other alarm devices were
triggered, equipment or were triggered, the
network camera will automatically decide
whether it is within the DI time period. If is, the
network camera will deal with the alarm signal
of detector in accordance with the preset
protocol; if not, the network camera will not
deal with that. You can copy the DI schedule
to other dates.
7.4.6 Alarm Setup
7.4.6.1 Alarm Type
[Alarm Type] Select alarm type: Motion detect, Video loss and Cover Alarm
1) Motion:
Motion Alarm needs to circle one or more areas on the image. If there are the moving
objects within the circled ranges, alarm will be triggered. The bigger number the sensitivity,
the more sensible the motion detects. After set up, you can click "test", if the screen of the
designated area turns red and flash, which represents alarm triggered within this area.