User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 72
7.4.5 Sensor setup
[Sensor Name] Enter the name description of the sensor.
[Type] Select alarm type (sensor type) from “NO” (Normally Open) or “NC” (Normally
Close)
[Policy] Selecting “Sensor Alarm Handling” firstly, handling policies will be available as
follows:
Upon receiving the warning signal by alarm
detector, network cameras process the
alarm and image, including: monitors alarm,
sound alarm, upload alarm information and
images to the central management system
(requires Center Management Software
Support), and triggering alarm output.
Setup whether use the presets after
receiving warning signals, if use, the high
speed dome will automatically switch to the
preset position.