User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 69
7.4.4 PTZ settings
7.4.4.1 Basic settings
[Baud rate] Set baud rate according to PTZ protocol from the drop- list, selectable baud
rate can be 2400, 4800 or 9600High speed dome default baud rate is 2400.
[PTZ Address] Set the address of the decoder, which must be matched with the value of
dipswitch in the PTZ. Address 0-255 is selectable.
[PTZ Protocol] Select the communication protocol for the PTZ camera from drop-list. This
network camera supports over 70 protocols.
High speed dome default protocol is PELCO-D (H).
Note:
You can test the PTZ and lens after set up the decoder’s parameters as above figure 4-2