User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 65
7.4.3 Channel setup
7.4.3.1 Basic settings.
Master Stream and Secondary Stream can
set two different network streams (including image quality, frame, resolution, etc),
therefore, according to different situations, you can select the suitable stream type.
[Frame Rate] Set up the Frame Rate for Network cameras. ALL(real-time) ,
1/16(1/16fps) , 1/8(1/8fps) , 1/4(1/4fps) , 1/2(1/2fps) , 1(1fps) , 2(2fps) , 4(4fps) , 6(6fps) ,
8(8fps) , 10(10fps) , 12(12fps) , 16(16fps) , 20(20fps) selectable, the higher frame rate, the
more network bandwidth needed, you can select the suitable frame rate according to
network.
[Image] Setting up the picture quality transmitted by network cameras: The best, better,
good, average, bad, the worst image quality. The better image quality, the more network
bandwidth needed by transmission occupation.
[Resolution] Set up the resolution for camera image transmit and storage. The selectable
resolution can be PAL: 4CIF (704*576), 2CIF(704*288),DCIF(528*384),CIF(352*288) ,
QCIF(176*144);NTSC: 4CIF (704*480), 2CIF(704*240),DCIF(528*320),CIF(352*240) ,
QCIF(176*120) , The higher resolution, the more clear if the bigger dimension the image,
but the more hard disk space will be occupied by storage and the more bandwidth needed
by transmission.