User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 64
7.4.2 Server setup
[Server Name] Name the network cameras.
[Server IP] Setup (change) the IP address of network cameras
[Port] Setup the network camera connected port.
[Subnet Mask] Setup the network camera subnet mask.
[Net Gate] Setup the network camera net gate.
[Net Cable Type] Set up net cable type.
[use PPPOE] (√) tick means working. Use PPPOE to dial-up access to the internet (such
as ADSL dial-up).
[PPPOE Login Name] The user name for setting PPPOE dial-up
[PPPOE Login Pass] The Login password for setting PPPOE dial-up
[PPPOE IP] Display the IP address after PPPOE dial-up successful, the IP address is
unchangeable.
[User name] Display the user name for administers, the name is unchangeable.
[User password] Change the login password for administers.
Note:
Be careful for this setting. (Please remember the new password for administers)
[DNS Server IP] If use DNS, input the DNS host IP address.
[Remote manage IP] Set up IP address of remote management main computer.
[Remote manage port] Set up the port for login remote management main computer.
[Physical address] Display the Physical address of IP Camera.
[Software Version] Display the Version of software, unchangeable.
[DSP software Version] Display the Version of DSP software, unchangeable.
[Hardware Version] Display the Version of hardware of network camera, unchangeable.
[Serial No] Display the serial number of IP camera, unchangeable.