User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 62
7.3.4 PTZ Control panel
Note:
PTZ control function only is suitable for the following situation:
1） network high speed Dome
2） network camera work with PTZ
This function will be available after setting up related protocol and Baud
rate. More information:
PTZ setup
Press this button to call the preset. It is used before
the preset positions are set. More information: Set up the preset
Press this button to control the lights’ on and off (need the support from
equipped PTZ decoder, the network high speed dome do not have this function)
Press this button to control the wipers’ on and off (need the support from
equipped PTZ decoder, the network high speed dome do not have this function)
[Zoom + / Zoom –] Adjust zoom of Electrical zoom lens.
[Focus + / Focus –] Adjust focus of Electrical zoom lens.
[Iris + / Iris –]Adjust Aperture of Electrical zoom lens.
By pressing and holding these buttons, the PTZ camera is moved
up, down, right and left.
Pressing this button initiates the connected PTZ camera to do an
automatic tour of 360°.