User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 57
The new IP address will take effect after restarting this equipment.
7.2 Using IE browser connected network camera
When you want to connect to the network camera, only need to input the network
camera's IP address in the IE Address bar, then click the "link" or the "Enter" button on the
keyboard.
If it is your first time to access to the network cameras through the IE browser, the
operating system will prompt you to install a plug-in, as the following picture: (Take
Windows XP-as the example, basically similar to other operating systems.)
Click
to install this Active X. You need to wait different time according to
different net speed. (Usually between 20-120 sec)
After installation, the page will automatically enter into the user interface to verify the users,
as the following picture:
Inputs the corresponding connects port, the user name and password, and select the