User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 56
Chapter 7 IE client for IP Camera
7.1 IP Camera address search and setup
In the network camera software packages, there is a "search software SADP of IP
Camera" folder, including SADP software. SADP software is used to identify and
configure all the cameras’ IP address and mask address in the LAN (must be in an open
state). SADP software uses unique search activated equipment technology, when the
user does not know or has forgotten network camera's IP address, can find it via SADP
software. This software can be run in Windows2000/XP system, and needed the support
from the operation of Wincap; users need to install software Wincap Package, The
packages include "WinPcap_3_1_beta_3" software.
SADP is not needed to be installed, can be run directly, the software will automatically
search IP cameras in the LAN after running, then displayed the cameras in the table form,
as below:
Here you can change the current equipment’s IP address and mask address, then
input the one you want, after that, click .
Note:
Display the IP address; connect port and
Hardware series number of equipments
searched out