User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 43
can’t connect the DVS correctly.
[DNS Server IP]If use DNS, input the DNS host IP address.
Remote manage: Set the IP address and port of host
server who will receive the message upload from
foreside server
5.3 Channel setup
Press button to set channel parameters.
This section contains the parameters to designate a name for every camera connected, to
enable or disable show LOGO and OSD, and to set display type of OSD & LOGO as well
as record resolution, record type, record quality and frame rate, etc.
[Camera]Select the camera to be set from the drop- list.
[Camera Name]Enter a name description for easy identification.
[Frame Rate]Select the record rate of camera from drop-list.
[Resolution]Set the resolution at which the video files will be recorded. Choices are DCIF,
CIF, QCIF, 2CIF and 4CIF. The higher resolution, the more disk space
[Stream Type]Select video and audio or only video record.
[Image]Set the quality of the image to be recorded. Select from worst, worse, normal,