User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 25
Note:
After finish them, When you have finished setup you should save your change by pressing
“save” button to store the setup successfully before for other set.
3.5 Recording setup
Click to enter the record setup interface (Figure 3—5)
Figure 3—5
[Select Window]Select the window you want to set.
Figure 3—6
[Record type]Set the type of record, including “Normal record”, “Sensor record”, “Motion
record” and “not record”. You can set record type as follows:
Firstly, press the type button that you want to set.
Then select the record time by press the grid (delegate half an hour in a day) or
left-click mouse and drag for an area.
If you want to set same record status every half hour every day, you may double-click
the left up of the chart (The place circled in red of
Figure 3—6)