User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 24
Figure 3—4
[Frame Rate]There are three selections: Realtime, Auto and 1fps.
①R ealtim e: If it’s selected, server will send all compacted information to client. When the
client gets this information, it will play it. The continuality is good in this way but it
consumes too much CPU space. If there is no information losing when compacting and
sending, the playing will be real-time.
②A uto: Its difference from Realtime is that when the client gets the information, he will cut
some information and then play it. It consumes less CPU space. But if you click any
camera, system will adjust frame rate to Realtime automatically.
③1fps: It means to break down the information in server. Only one frame of important
information is sent to the client every second. It consumes little CPU space and network.
And if you click any camera, system will adjust frame rate to Realtime automatically when
there is enough network space. (NOTE: This selection is only effective on PC-DVR).
[Record Mode]There are two options: Record all along and Record by plan. When users
select “Record all along”, the
button has no effects. Record by plan will be
detailed in
Recording setup.
① Recording by planning. Once the windows is connected, recording by the table
time preset in the computer.
② R ecording forever: O nce the w indow connects, local recording is going, unless the
manual cancel.