User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 23
Figure 3—3
Choose a group from drop-list behind [Select Setup Group] first. There are 16 groups. In
every group, you can set 36 connections. Also, you can select the partition for every group
from the drop-list behind [Partition Mode]”. Then you can set group as follows:
[Window] display the channel of window on the interface.
[IP Address Alias]Select the server in which the camera will be selected to show If it has
no severs in the drop-list, you need to add server in the “Server IP” page (
Figure 3—1).
[Camera]Select the camera of the server set in [IP Address Alias] to be connected. In
one window, you can set one or more camera’s connection (
Figure 3—4), if more than
one camera show in one window, you can set cycle interval time. You can switch them by
pressing button
and in Main interface.
Double click the blank or the button,
will pop
the right picture.