User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 22
[IP Address]Set IP address of the server host.
[Connect Port] Set the port through which to connect to DVR Server. Please don’t
change it unless some unexpected conditions.
[Login user ID]& [Login Pass] when the client want to visit server and the server has
used the function of rights management, login user ID and password will be checked. If
the user has no right to visit that camera, the connection will be cut down automatically. If
the function is not used, the ID and password will not be checked.
[If use DNS to get IP]Select whether use DNS to get IP or not, if the server end is the
dynamic IP address, users need use DNS to get the server’s IP.
[DNS Server IP]Set IP address of DNS server host.
[DNS Server Port]DNS server host’s ort, which is used to set up the port through which
connects to DNS server host.
3.1.2.2 Modify server
Press button to modify server information, its interface is same as Add
Connected Server.
3.1.2.3 Delete connected server
Press button to delete connected server.
3.1.2.4 Get camera information
Press button to get the latest camera information of Server end when it
changes its setups such as number of channel, camera name etc.
Note:
When you have finished every setup you should save your change by pressing “save”
button to store the setup successfully before you exit setup.
3.4 Group setup
Click button to enter the following window (Figure 3—3):