User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 20
For example:
This icon has four windows: window1, window2, window3, window4.
[Decode channel Index in window] Select window index
for the selected window. Each window can only select one decode channel. The number
of decode channel will be showed automatically according to the channels of the decode
card. For example, if there is one IDRS-6004MD card, there will show the 8 decode
channel, if there are two IDRS-6004MD cards, there will show the 16 decode channel, if
one IDRS-6002MD card, there are 4 decode channel only.
Show the have
been selected
decode channel
of the each
output port
Decode output port split mode
Figure 3—2
This figure (Figure 3—2) shows the decode channel have been selected, in order that
user can’t select the decoder repeatedly.
Note:
If use “CIF decode mode”, and there isn’t preview video appear in the IDRS NVR client
main interface. The reason for this is that the resolution setup too high in DVR Server end.
For example: D1. (Please restart IDRS NVR Client software after this item setup).
[Bandwidth Auto Adjust]Select whether system adjust the bandwidth automatically
when the window is hide and corresponding camera has no record plan, the program will
stop to connect corresponding camera with foreside server to reduce CPU usage.
[Software Start Auto Connect]Select the group set in
Group setup to be connected
when the program start. When you select “Disable”, Client will not connect the camera
automatically.
[Auto Reconnect interval]Select whether the client to reconnect when the connection is
interrupted and the interval time. If you select “Disable”, when the connection is
interrupted, program will not reconnect it.