User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 19
[Alarm connect server]Enable: if there has alarm in DVR server end, the client end will
connect the DVR server forwardly.
[Alarm send port]It must be the same as those in the setup window of server alarm auto
input.
[Alarm Write log]Select whether system writes alarm information log or not.
[Matrix card work mode]Setting the use of the matrix and decode card. If use matrix and
decode card, select work mode from D1 decode mode or CIF decode mode and set it.
Note:
Each IDRS-6002MD card can decode 2 channels D1 or 4channels CIF.
Each IDRS-6004MD card can decode 4 channels D1 or 8 channels CIF.
Decoder will send out corresponding number channels from the first window in sequence.
User can set each output port individually.
[TV output port] Select decoder card output port.
[TV output View Mode] Set the split mode for selected port.
[Window index of TV port] Select the index for each split window.