User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 16
2.2.5 DI/DO control
Note:
The channel of DI and DO is determined by the connected server
2.2.5.1 DI control
The DI number will show the alarm status of the corresponding server indicated by the
shades of the icon:
Channel 3 has no sensor alarm input.
Channel 1 has a sensor alarm input.
When there has no alarm yet, user can press number button to check sensor forcibly.
Press the button again to stop to check all time, then system check sensor according to
Sensor setup. When there has an alarm, the corresponding button will show the alarm
with green.
2.2.5.2 DO control
Press number to open/close alarm device relay switch manually. The status of DO have
two types:
Output channel 2 is close.