User manual

IDRS-6000S-HE Series NVR Client User Manual
Page 12
2.2.3 PTZ control panel
Press button to control PTZ.
2.2.3.1 Common PTZ control
[Relay] (On/Off): Control the PTZ cameras internal
relay (relay1) or the decoder’s relay (relay 1). Used to turn on a light or
control an access gate.
[Wiper (On/Off): If using the PTZ cameras
corresponding wiper control relay, this toggles the relay/wiper on and
off.
[Zoom + / Zoom –]: Control the zoom function of
the PTZ camera.
[Focus + / Focus –]: Overrides the auto-focus
setting of the PTZ camera, adjust focus the image.
[Iris + / Iris –]: Overrides the PTZ cameras auto-iris and brighten or
darken the image.
By pressing and holding these buttons, the PTZ camera
is moved up, down, right and left as well as other
directions.
Pressing this button initiates the connected PTZ camera
to do an automatic tour of 360°.
2.2.3.2 Speed Demo control
Click this button, there will popup a menu, including .
The premise of setup is the front-end PTZ and decoder supporting preset and shift
speed functions.
Adjust the platform and lens at some position you want, then mark this position (when
setup the preset and add the preset, the same), so that, can make the platform shift to the