NVR Client & IE Client IDRS-6000S-HE Series User Manual Beijing Backbone Computer Technology Co.,Ltd Tel: 86-10-62975811 Fax: 86-10-62979244 www.chinasecuritysystem.
IDRS-6000S-HE Series NVR Client User Manual Content CHAPTER 1 SOFTWARE INSTALLATION................................................................................. 4 CHAPTER 2 MAIN INTERFACE ................................................................................................... 5 2.1 FUNCTION BUTTON INTRODUCTION ................................................................................................. 5 2.1.1 Display division mode ....................................................
IDRS-6000S-HE Series NVR Client User Manual 4.4 RECORD DATA DISPLAY .................................................................................................................. 30 4.5 CAPTURE PICTURES ....................................................................................................................... 31 4.6 CREATE CLIP FILE .......................................................................................................................... 31 4.6.1 Create file clip ...........
IDRS-6000S-HE Series NVR Client User Manual 7.5 LOCAL PLAYBACK ......................................................................................................................... 75 7.6 REMOTE PLAYBACK .......................................................................................................................
IDRS-6000S-HE Series NVR Client User Manual Introduction: Thank you for purchasing IDRS NVR client system. This IDRS NVR client system can connect PC-DVR (IDRS-6000S PV Based DVR, IRRS Standalone DVR, Network Camera and DVS.) IDRS NVR Client Software, is standalone software, it support all of equipment of IDRS (Include: PC Based DVR, embedded DVR, DVS, and Network camera). It can set them and search their recording data remotely.
IDRS-6000S-HE Series NVR Client User Manual Chapter 1 Software installation Find the files of IDRS Serials DVR/DVS Client, and open it and double click the SETUP.EXE. Like the following picture: You can choose the position of the software installation here, and then click the “NEXT” after you have chosen one. Confirm the installation information, then click “NEXT”, after the installation process completed, Click “FINISH”.
IDRS-6000S-HE Series NVR Client User Manual Chapter 2 Main interface Note: 1. Show tips: When the mouse moves closely or stops over a button, the button function text tips show immediately. 2. Full screen mode: Double-click mouse of right mouse will change display mode to full screen mode, click again to turn back. At the most 36 pictures can be shown on the main window at the same time. 2.1 Function button introduction 2.1.
IDRS-6000S-HE Series NVR Client User Manual 2.1.2 Manual record switch Press button to record manually to any camera: It is used to manually control recording for the channel without recording. Click it and if it is become orange, it is recording status, vice versa. If it is not closed manually, it will record forever. 2.1.3 Image capture button Press button to save a still image of a selected camera in live view that is selected by user onto hard disk, and then review and print the image. 2.1.
IDRS-6000S-HE Series NVR Client User Manual Select one server from dropdown list (the server in dropdown list is that have been registered in the client), click “OK” and enter the playback interface. Remote search includes search for PC-DVR and EM-DVR. Remote search for PC-DVR is almost same with Local search, only different feature is that remote playback added download feature.
IDRS-6000S-HE Series NVR Client User Manual System log keeps a record of system events such as program startup and shutdown, changing camera setup and all Operator or System daily activities according to time and date. System parameter includes operations, system prompts, alarms and other activities. You can choose the log’s date and also can choose different kinds of logs according to different rules, still can store the log you interest by word types. 2.1.
IDRS-6000S-HE Series NVR Client User Manual Remote log is only available to PC-DVR. 2.1.11 Remote char Press button to make a voice chatting. Voice over IP, Initiates dialog to connect to a remote client or Server for purposes of live chat. Click it to have remote chat with the connected server. Sound card with Mic input should be used. If there is no sound card on both sides, the chat will not be carried on. Figure2-1 Select a server from dropdown list to make remote chat (Figure2-).
IDRS-6000S-HE Series NVR Client User Manual After clicking this button, a dialog will display. Click “OK” to quit DVR system. 2.2 Interface function button 2.2.1 Connection group Press to enter connection group setup. You can set different tasks into different channels, each group at most set up 18 channels. For example, you have 70 channels’ pictures and need to set them into 3 groups, here, you can choose the group you want to look.
IDRS-6000S-HE Series NVR Client User Manual 36 buttons control 36 windows; you can click the button number to get the access to relevant window, click again, turn off the picture. If the button is grey, it means the channel did not connect the picture, if the button is black, it means the channel connected the picture without recording, if the button is green, it means both activities are doing done.
IDRS-6000S-HE Series NVR Client User Manual 2.2.3 PTZ control panel Press button to control PTZ. 2.2.3.1 Common PTZ control [Relay] (On/Off): Control the PTZ cameras internal relay (relay1) or the decoder’s relay (relay 1). Used to turn on a light or control an access gate. [Wiper (On/Off): If using the PTZ cameras corresponding wiper control relay, this toggles the relay/wiper on and off. [Zoom + / Zoom –]: Control the zoom function of the PTZ camera.
IDRS-6000S-HE Series NVR Client User Manual marked position quickly according to requirement. (1) Preset setup Here to adjust the speed of platform Preset setup: firstly, put the name you want to call in Preset Name. Secondly, you can select the No in Preset No. Call Mode will make you select the order for preset “call” or to add this present, “setup”. Then click then, this position can be displayed on the bellowed list. If you want to delete some presets, first select it then click .
IDRS-6000S-HE Series NVR Client User Manual (2) Preset call: Let the mouse suspend on this area, there will auto popup the list of presets, then click the No. of preset needed to call on the list. (3) Preset tour: Let the mouse suspend on this area, there will auto popup the list of tour plan, and then click the No. of tour plan on the list.
IDRS-6000S-HE Series NVR Client User Manual 2.2.4 Color/Audio adjustment Press button to enter Color/Audio Adjust Panel —— Slider adjustments for the video image and recording volume of the selected tile. This also affects the live view of the video images. ① P ress the first button and drag to adjust the brightness of the image that you selected, and you can Increase Increase resume its default value by pressing.
IDRS-6000S-HE Series NVR Client User Manual 2.2.5 DI/DO control Note: The channel of DI and DO is determined by the connected server 2.2.5.1 DI control The DI number will show the alarm status of the corresponding server indicated by the shades of the icon: Channel 3 has no sensor alarm input. Channel 1 has a sensor alarm input. When there has no alarm yet, user can press number button to check sensor forcibly.
IDRS-6000S-HE Series NVR Client User Manual Output channel 1 is open. When there has no alarms triggered out, user can press the number button to output alarm forcibly and the button will show it with green, press it again the output will be closed.
IDRS-6000S-HE Series NVR Client User Manual Chapter 3 Local setup 3.1 System setup Click button to enter this window (Figure 3—1): Figure 3—1 3.1.1 System setup [Save Record mode]Choose how to handle the situation if the record data make full of the space of Disk. One is automatically deleting the recording of the earliest day and another is stopping the recording and gives the information. Auto: the system will cover the record data automatically when HDD full.
IDRS-6000S-HE Series NVR Client User Manual [Alarm connect server]Enable: if there has alarm in DVR server end, the client end will connect the DVR server forwardly. [Alarm send port]It must be the same as those in the setup window of server alarm auto input. [Alarm Write log]Select whether system writes alarm information log or not. [Matrix card work mode]Setting the use of the matrix and decode card. If use matrix and decode card, select work mode from D1 decode mode or CIF decode mode and set it.
IDRS-6000S-HE Series NVR Client User Manual For example: This icon has four windows: window1, window2, window3, window4. [Decode channel Index in window] Select window index for the selected window. Each window can only select one decode channel. The number of decode channel will be showed automatically according to the channels of the decode card.
IDRS-6000S-HE Series NVR Client User Manual 3.1.2 Add / Modify server Has already added the equipment list 3.1.2.1 Add connect server Press button to add a new server in this system. When user adds a new server, if there are some problems, e.g. network problem or not run this Server, user will add this server failure. [Server Name]The name of connected server host (Include PC-DVR, Network camera, DVS and EM-DVR), Input a name that is easy to identify.
IDRS-6000S-HE Series NVR Client User Manual [IP Address]Set IP address of the server host. [Connect Port] Set the port through which to connect to DVR Server. Please don’t change it unless some unexpected conditions. [Login user ID]& [Login Pass] when the client want to visit server and the server has used the function of rights management, login user ID and password will be checked. If the user has no right to visit that camera, the connection will be cut down automatically.
IDRS-6000S-HE Series NVR Client User Manual Figure 3—3 Choose a group from drop-list behind [Select Setup Group] first. There are 16 groups. In every group, you can set 36 connections. Also, you can select the partition for every group from the drop-list behind [Partition Mode]”. Then you can set group as follows: [Window] display the channel of window on the interface.
IDRS-6000S-HE Series NVR Client User Manual Figure 3—4 [Frame Rate]There are three selections: Realtime, Auto and 1fps. ①R ealtim e: If it’s selected, server will send all compacted information to client. When the client gets this information, it will play it. The continuality is good in this way but it consumes too much CPU space. If there is no information losing when compacting and sending, the playing will be real-time.
IDRS-6000S-HE Series NVR Client User Manual Note: After finish them, When you have finished setup you should save your change by pressing “save” button to store the setup successfully before for other set. 3.5 Recording setup Click to enter the record setup interface (Figure 3—5) Figure 3—5 [Select Window]Select the window you want to set. Figure 3—6 [Record type]Set the type of record, including “Normal record”, “Sensor record”, “Motion record” and “not record”.
IDRS-6000S-HE Series NVR Client User Manual When you finished the setup, the grid will display the corresponding color of the record type. • • • • Green: Normal Record. Red: Sensor Record. Blue: Motion Record. Gray: Not Record. [Copy record plan to]Copy one setup to any other windows or all windows. 3.6 User and Right setup Click button to set user right: 3.6.
IDRS-6000S-HE Series NVR Client User Manual [Password]Set new user and selected user’s password. [Auth. Level]Select user type. When you select admin in [Select User ID] this selection is unavailable. [Confirm password]Confirm password again. 3.6.2 User right setup You can set user management in this window after you input user name and password and you will have corresponding rights with your name. Choose a user and distribute corresponding right.
IDRS-6000S-HE Series NVR Client User Manual Chapter 4 Local search Click button in main window to enter local search window (Figure4— 1). Figure4— 1 4.1 Partition mode Press button to select partition mode, there are 1, 4, 9 and 16 partition mode. In the server end user can only connect 16 channels simultaneously, when the connected channels exceed the limit, system will popup information to indicate it. 4.2 Select playback channel 4.2.
IDRS-6000S-HE Series NVR Client User Manual signify no data. Only those blue ones can be selected and when they are selected the camera window will appear automatically to show which cameras has record data. Click or to change month and year of search data. Figure 4—2 Figure 4—3 Figure 4—4 4.2.2 Select camera After selecting date system will show the camera state of corresponding day, or click button directly to show the cameras state of current day (Figure 4—3).
IDRS-6000S-HE Series NVR Client User Manual 4.3 Play file and related operations Click this button to synchronize all playback channels time. Last frame, Start, Pause, Stop and Next frame First frame of that day, previous minute, next minute and last frame of that day Image zooms out: Press this button, single click the left mouse button on an image, quarter of the image will be enlarge. By thereafter, single click right mouse button on the image, it will resume the normal.
IDRS-6000S-HE Series NVR Client User Manual 4.5 Capture pictures Click capture button to capture a display picture. When one is captured, there will display a dialog interface and you can change the file name. After you press confirmation, system will save the picture in default path: System volume\Grab\search. Note: The size of the image is that of the playing window. 4.6 Create clip file Click button , there are follow three items to select. 4.6.
IDRS-6000S-HE Series NVR Client User Manual (2)File list and attribute Select a file and double-click it (Figure4—6) to play and its attribute will display below the list (Figure4—7), including begin time, end time, file size, resolution, frame rate etc. Figure4—6 Figure4—7 (3)Play file and related operations (a) Play control button to Press and drag slider on control the player time.
IDRS-6000S-HE Series NVR Client User Manual 4.6.2 Backup by Time Press to backup by time (Figure4—8) Figure4—8 [Save Path] Select path for the backup file, User can backup record file to CD. [Backup Camera] Select the backup camera. User can select more than one camera. [Select begin time] & [Select end time] Select the backup files’ begin time and end time. [Unite File] Select unite file enable or disable. If select disable, the record files will not unite.
IDRS-6000S-HE Series NVR Client User Manual free space should not less than twice of the backup data size. Because system volume will be used buffer area when burn CD. For example, if the backup data size is 450M, so, the system volume’s free space should more than 900M.
IDRS-6000S-HE Series NVR Client User Manual Figure 4—10 1. Select channel and path Select channel and path of the backup file in local disk on the top of interface (Figure 4—10) 2. Play file and related operations (a) Play control button to Press and drag slider on control the player time. (b) Play button The start of the record, previous frame, Start/Pause, Next frame and the end of the record (c) Capture picture Press button to capture a picture.
IDRS-6000S-HE Series NVR Client User Manual Press button to burn CD ① Zone: The directory tree added which prepares to record the documents. ② Zone: The display area for added the detailed list of documents and files. Here to choose the equipment needed to burn. Here to put in the Volume Label of this Disk. Add the document needed to be recorded.
IDRS-6000S-HE Series NVR Client User Manual Here, can choose documents or files to add, and then click “Open”, after that, the document or files you choose will be listed on the directory tree. Delete the added files. Select some document listed on the directory tree, then click this button, this file will be deleted clearly, including the inside folder and subfolder. Erase CD.
IDRS-6000S-HE Series NVR Client User Manual 4.7 Search captured pictures Click to enter the search window: 1. Select pictures from directory and file list You can select a captured picture from directory list (Figure 4—11) and file list (Figure 4— 12) in local disk. By default, the directory is: System volume\Grab\Search. After you select the path the file name will show in the top of the window (Figure 4—13).
IDRS-6000S-HE Series NVR Client User Manual Figure 4—13 Note: Figure 4—13 show name and path of current picture. If you want to save the reworked picture in another file you can change its name and path here, with bmp and jpg as suffix. Then click the button . 2. Related operations After you edit the picture you can save the picture in a save path as you 1) like. 2) Function buttons of picture disposal. 3) When the result of disposal is not good click it to the default.
IDRS-6000S-HE Series NVR Client User Manual Chapter 5 Remote setup Click button to enter remote setup. Figure 5—1 Select one server to search from the server list (Figure 5—1). Remote setup for PC-DVR is mostly same as Local setup in IDRS PC Based DVRs server manual.
IDRS-6000S-HE Series NVR Client User Manual Figure 5—2 5.1 Functional buttons There are 5 the same buttons in each page. They are Upgrade, Restart, Time adjustment, Save and Exit. 【Upgrade】The system can upgrade to the server remote. Click this button, and select the right file. 【Restart】Some setting will only come into effect after device reboots. 【Time Adjust】Adjust date and time of DVS or EMDVR. The new date and time will accordant with IDRS NVR client computer.
IDRS-6000S-HE Series NVR Client User Manual 5.2 Server setup Press button to set server parameters remotely: In the server window, some blanks’ background are gray. Those parameters are read from foreside server, you can’t modify them. Other blanks whose background is white, you can set them remotely. Enter the name description for easy identification. This name delegates the foreside server. If use DNS to get IP, this name will be used.
IDRS-6000S-HE Series NVR Client User Manual can’t connect the DVS correctly. [DNS Server IP]If use DNS, input the DNS host IP address. Remote manage: Set the IP address and port of host server who will receive the message upload from foreside server 5.3 Channel setup Press button to set channel parameters.
IDRS-6000S-HE Series NVR Client User Manual good and best. [Bit Rate Type]Select bit rate type from Variable Bit Rate (VBR) and Fixed Bit Rate (FBR) record: VBR range= Poorest, Poor, Medium, Good, Best. FBR range = 45 Megabytes/Hour to 400 Megabytes/Hour. [Max Bit Rate]Select the maximum bit rate for Variable Bit Rate (VBR) record. [Show LOGO/ OSD/ Week]If you check those boxes, system will show corresponding information on screen.
IDRS-6000S-HE Series NVR Client User Manual Figure 5—3 Note: This record schedule is only available to EM-DVR. There are 4 time segments every day. Every segment has start time, end time and record type. The time segment is set in sequence; every segment can’t be overlapped, included or skipped with any other. [Copy to]After finishing one channel, if you want to set any other channels’ configuration as the same as this camera, you can select channel number from drop-list, and press button. 5.
IDRS-6000S-HE Series NVR Client User Manual In this screen, you can define the PTZ protocol and set the Preset Position as well as the plan to execute them automatically. [Camera]Select the camera to be set from the drop- list. [Baud rate]Set baud rate according to PTZ protocol from the drop- list. [PTZ Protocol]Select the communication protocol for the PTZ camera from drop-list. [PTZ Address]Set the address of the decoder, which must be matched with the value of dipswitch in the PTZ.
IDRS-6000S-HE Series NVR Client User Manual [Copy to]After finishing one channel, if you want to set any other channels’ configuration as the same as this camera, you can select channel number from drop-list, and press button. 5.5 Sensor setup Press button to set sensor parameters.
IDRS-6000S-HE Series NVR Client User Manual [Sensor NO]Select one sensor to be set. [Sensor Name]Enter the name description of the sensor. [Type]Select alarm type (sensor type) from “NO”(Normally Open) or “NC”(Normally Close). [Policy]Selecting “Sensor Alarm Handling” firstly, handling policies will be available as follows: On screen warning—Display the alarm information on the monitor. Audio warning—Indicate the alarm with voice. Upload to center—Update the alarm information to center.
IDRS-6000S-HE Series NVR Client User Manual [Copy to]After finishing one channel, if you want to set any other channels’ configuration as the same as this camera, you can select channel number from drop-list, and press button. 5.6 Alarm setup Press button to set alarm parameters. [Camera]Select a camera to be set from the drop-list and you can copy the configuration to the other cameras by clicking copy button.
IDRS-6000S-HE Series NVR Client User Manual [Alarm Type]Select alarm type: Motion detects Tempering alarm and Video Loss. [Level] Select sensibility levels from 0 (the lowest level) to 5 (the highest level) for the alarm [Set motion detection areas]Left-click mouse and drag it on the screen to select motion detect area, you can select the whole area or many areas. Also, you can clear one or whole area by press the button clear and test the effect by clicking test button.
IDRS-6000S-HE Series NVR Client User Manual Chapter 6 IE client for PC based DVR The client user can look through video of DVR Client by Internet Explorer, The default web server port is 80; if change other port, user should add the port number after IP address of DVR Client. E.g.: http://192.168.0.119:1180. 6.1 Functions of IE Client 1. Video display and video storage. 2. Audio input. 3. Searching and playback video image locally or remotely. 4. Control PTZ and speed demo remotely; 6.
IDRS-6000S-HE Series NVR Client User Manual 6.2.1 Connection/Record status Figure 6—2 This icon (Figure 6—2) indicates the current connection and their record status: Gray: Not connected. Navy blue: Connected with no record. Green: Connected with record. You can change the record status by pressing corresponding number button or change status of all connections at the same time by pressing button. 6.2.
IDRS-6000S-HE Series NVR Client User Manual Playing operation area Display setup and data information Figure 6—3 Display setup and data information In this area, you can select display partition mode, date, video channel and its video file named according to time.
IDRS-6000S-HE Series NVR Client User Manual Playing-control buttons Play Pause Stop Single frame play Previous frame Next frame Playing speed control Slowly play Fleetly play 6.
IDRS-6000S-HE Series NVR Client User Manual When you playback, you click down , system will save video of current channel you selected, and after save finish one file, it will popup prompt to indicate its working. Select one camera that has record data, open file list panel, select one record data package, and click button, the selected data package will download fast. NOTE: When user use IE client to visit DVR Client, If connect successfully, there will appear four partition blue window.
IDRS-6000S-HE Series NVR Client User Manual Chapter 7 IE client for IP Camera 7.1 IP Camera address search and setup In the network camera software packages, there is a "search software SADP of IP Camera" folder, including SADP software. SADP software is used to identify and configure all the cameras’ IP address and mask address in the LAN (must be in an open state).
IDRS-6000S-HE Series NVR Client User Manual The new IP address will take effect after restarting this equipment. 7.2 Using IE browser connected network camera When you want to connect to the network camera, only need to input the network camera's IP address in the IE Address bar, then click the "link" or the "Enter" button on the keyboard.
IDRS-6000S-HE Series NVR Client User Manual suitable stream type (Master Stream, Sub Stream. See more information: 4.3.
IDRS-6000S-HE Series NVR Client User Manual 7.3 Main interface The images will be displayed automatically after entering into IE main interface.
IDRS-6000S-HE Series NVR Client User Manual 7.3.1 Image Enlargement & Smallness You can enlarge or small the image by double-clicking left-key of the mouse. Using the right-key of the mouse to click the image will make image size be1024 * 768. (When the display resolution set is 1024 * 768, the image will be full of the screen, not show IE windows and display software borders, etc.) 7.3.2 Functional buttons Press the button to connect the image, press it again to stop the connection.
IDRS-6000S-HE Series NVR Client User Manual 7.3.3 Color and Audio adjustment ① ② ③ ④ ⑤ ① Press the first button and drag to adjust the brightness of the image that you selected. ② Press the second button and drag it to adjust the contrast of the image that you selected value. ③ Press the third button and drag it to adjust the HUE of the image that you selected. ④ Press the fourth button and drag it to adjust the saturation of the image that you selected.
IDRS-6000S-HE Series NVR Client User Manual 7.3.4 PTZ Control panel Note: PTZ control function only is suitable for the following situation: 1） network high speed Dome 2） network camera work with PTZ This function will be available after setting up related protocol and Baud rate. More information: PTZ setup Press this button to call the preset. It is used before the preset positions are set.
IDRS-6000S-HE Series NVR Client User Manual 7.4 Remote Setup Note: All of setup will take effect after be saved and restarted. Press button to Remote Setup 7.4.1 Functional buttons [Upgrade] User can upgrade IP Camera remotely. Click this button, and select the right file [Restart] Some settings will only take effect after device reboots [Format Disk] Format SD card in IP camera [Time Adjust] Adjust date and time of IP Camera.
IDRS-6000S-HE Series NVR Client User Manual 7.4.2 Server setup [Server Name] Name the network cameras. [Server IP] Setup (change) the IP address of network cameras [Port] Setup the network camera connected port. [Subnet Mask] Setup the network camera subnet mask. [Net Gate] Setup the network camera net gate. [Net Cable Type] Set up net cable type. [use PPPOE] (√) tick means working. Use PPPOE to dial-up access to the internet (such as ADSL dial-up).
IDRS-6000S-HE Series NVR Client User Manual 7.4.3 Channel setup 7.4.3.1 Basic settings. Master Stream and Secondary Stream can set two different network streams (including image quality, frame, resolution, etc), therefore, according to different situations, you can select the suitable stream type. [Frame Rate] Set up the Frame Rate for Network cameras.
IDRS-6000S-HE Series NVR Client User Manual [Bit Rate Type] Setup the network cameras’ rate type which is divided into the fixed rate and variable rate. When it is variable bit rate, the transmission rates will automatically changes with different intensity of the screen. More Image activities, more increased rate, vice versa. Fixed Rate will not be impacted by image activities and will be maintained at a relative stable value.
IDRS-6000S-HE Series NVR Client User Manual 7.4.3.4 Record schedule Recording Type: ▪ Specified Time: Real time recording within specific time without conditions ▪ Motion: Automatically record when it detects the moving object in the monitored images no moving objects, no recording. ▪ Alarm: Automatically record when it receives the alarm signal, no get alarm signal, no recording. ▪ Motion | Alarm: Automatically record when it detects the moving object or receives the alarm signal.
IDRS-6000S-HE Series NVR Client User Manual ▪ Command: Not developed. ▪ Manual: Not developed. [Enable Rec] Choose whether to record or not Set up the recording plan according to 24-hour recording style, only use one recording type 24 hours, the types of recording can be selectable, but recording at different periods of time is not available. [Rec Day] Select recording dates You can record at different periods of time; there are 4 periods of time.
IDRS-6000S-HE Series NVR Client User Manual 7.4.4 PTZ settings 7.4.4.1 Basic settings [Baud rate] Set baud rate according to PTZ protocol from the drop- list, selectable baud rate can be 2400, 4800 or 9600High speed dome default baud rate is 2400. [PTZ Address] Set the address of the decoder, which must be matched with the value of dipswitch in the PTZ. Address 0-255 is selectable. [PTZ Protocol] Select the communication protocol for the PTZ camera from drop-list.
IDRS-6000S-HE Series NVR Client User Manual 7.4.4.2 Set up the preset 1) Set up the preset: Adjust the PTZ and lens at the right place, then choose one preset number, then click “setup”. The preset number is up to 32. 2) Call the preset: Chose one preset, and then click the “call” button. It is used for checking the preset positions. 3) Delete the preset: Chose one preset, then click the “delete” button. 7.4.4.
IDRS-6000S-HE Series NVR Client User Manual Save the schedule. Click this button to delete any item in the schedule The method to call presets time schedule Firstly, choose the number of this presets schedule, Secondly, choose the preset you want to call. Thirdly, choose fixed time to call the preset. Finally, click the above image( Figure4-3 ) Preset 1 on 14:30 Monday button. Take as example: The PTZ will turn to Preset 2 on 8:30 AM and 7.4.4.
IDRS-6000S-HE Series NVR Client User Manual 7.4.5 Sensor setup [Sensor Name] Enter the name description of the sensor.
IDRS-6000S-HE Series NVR Client User Manual Set up DI time schedule. When front equipment and other alarm devices were triggered, equipment or were triggered, the network camera will automatically decide whether it is within the DI time period. If is, the network camera will deal with the alarm signal of detector in accordance with the preset protocol; if not, the network camera will not deal with that. You can copy the DI schedule to other dates. 7.4.6 Alarm Setup 7.4.6.
IDRS-6000S-HE Series NVR Client User Manual 2) Cover Alarm: When the cameras are covered on illegal purposes, the detector will send the alarm signal. The cover range can be set, but only can be one. The sensitivity also can be set and tested after that. 3) Signal Lost: Whatever any reason, the warning signal will be sent only if the video signal is not connected. The bigger number, the more sensible the motion detects.
IDRS-6000S-HE Series NVR Client User Manual 7.5 Local Playback Figure5-1 Choose the date of recording material to playback, after this, it will automatically list the dates of the video information, like the above chart (Figure 5-1).After the left mouse button’s double-click on the selected time, it can playback the corresponding video information.
IDRS-6000S-HE Series NVR Client User Manual 7.6 Remote playback Figure 6-1 Choose the date of recording material to playback, after this, it will automatically list the dates of the video information, like the above chart (Figure 6-1).After the left mouse button’s double-click on the selected time, it can playback the corresponding video information.
IDRS-6000S-HE Series NVR Client User Manual Select one camera that has record data, open file list panel, select one record data package, and click button, the selected data package will download fast. Click this button to save the Audio and Video recording material which is play backing; press it again to stop the save. Note: This function will be available only the SD card is inserted and recording plan is set up.
