User`s manual

Beijing ART Technology Development Co., Ltd. V6.032
7. Serial port settings: A-GPRS1090I provides a serial port to transfer the data; serial port configuration is shown
as the following.
8. Heart rate settings:
"Heartbeat Package Interval": it will send a heartbeat in a certain time, the default value is "30s", and we can
change it in the program.
"Heartbeat Package Timeout": the module will re-connect in timeout if there is no heartbeat. The default value is
"120s"; we can change it in the program.
5.1.2 ARTServer Server Program
Start \ all programs \ ART Data Acquisition Measurement Suite \ A-GPRS1090I \ ARTServer Service procedure
1. Click the "Service Settings" button to set the main server port number (the port number should be the same as the
"Main Data Center Port No."), show as the following:
22