User`s manual

Beijing ART Technology Development Co., Ltd. V6.032

Chapter 5 Application Introduction

5.1 Protocol Transmission

5.1.1 Configuration Settings

1. First of all, select "Agreement transfer" of "transfer mode".

2. DNS of "Server DNS1" and "server DNS2" has been set, if need, we can change it. (Default settings are: DNS1

= 211.136.17.107, DNS2 = 202.106.0.20).

3. "Master data center IP" uses the public IP (if we use the "main data center domain name", then the current item

must be empty).

Note: the public network IP address changes every day, so it needs to be updated.

4. "Main data center domain," we can use software to application a domain name, by a third party to manage the

domain name, it is more convenient for us.

Note: The "main data center IP" must be set to empty when we use the domain name to connect.

5. "Main data center port No.": The computer that is using "ARTServer.exe" application needs to open a port number

and the port number is set in the current item.

6. Select TCP mode of "Main Data Center link Mode".