User`s manual

Beijing ART Technology Development Co., Ltd. V6.032
2 "Terminal existence”: If you do not choose the "Terminal existence", it will be an invalid terminal, ARTServer does
not accept the connection request from terminal.
3 "Heartbeat interval" refers to the time of sending a terminal heart to ARTServer.
"Heartbeat overtime" means the terminal does not receive the heartbeat packets from ARTSever for seconds, and
then it will think the module has been dropped. After has dropped the terminal it will determine next connection
according to their own "try spacing" parameter. Heartbeat parameters ensure the terminal on line; the value can be set
by users.
Delete terminal
Click the list box to delete the terminal, select the menu "Terminal Management | delete Terminal" or click the toolbar
"terminal delete" button, pop-up dialog box to confirm the deletion. Clicks “Yes” while the terminal deleted.
Mapping management
ARTServer supports four mapping methods: terminal –to- terminal, terminal -to-local physical serial port, terminal to the
local virtual serial port, terminal to the local TCP port.
1 terminal –to- terminal mapping: two terminals exchange the data by ARTServer.
2 Terminal to the local physical serial mapping: ARTServer opens a specified and actual serial port, and then transmit
data between terminal and the serial.
3 Terminal to the local virtual serial port mapping: ARTServer creates a virtual serial port, and then transmit data
between virtual serial port and terminal.
4 Terminal to the local TCP port mapping: ARTServer opens a local server port, and then transmit data between
terminal and the TCP port.
Show as figure:
Instruction:
1 terminal own should not map, when map TCP ports, TCP port numbers are different.
2 Make sure that no program is opening the virtual serial port when we want to delete it.
3 If you want to delete the mapping, please click the "Mapping" to remove the one which you want to delete, and
then click the "delete mapping" option.
19