User`s manual

A-GPRS1090I User’s Manual Version: 6.021
7 Serial port settings: A-GPRS1090I itself provides a serial port to transfer data; serial port configuration is shown
below.
8 Heart rate settings:
"The interval time of heartbeat packet": it will send a heartbeat in a certain time, the default value is "30s", and
you can change it in the procedure.
"The timeout of heartbeat packet": the module will re-connect in overtime if there is no heartbeat. The default
value is "120s", and you can change it in the procedure.
ARTServer server program
Start menu \ program \ ART Monitoring Demonstration System \ A-GPRS1090I \ ARTServer Service procedure
1 Click the left "Service Setting" button to set the main server port number (the port number should be the same as the
"main data center port number"), show as follow:
24