User`s manual

Beijing ART Technology Development Co., Ltd.

Chapter 5 Application Introduction

Agreement transmission

Configuration Settings

1 First of all, set the "transfer mode" to "transfer agreement."

2 DNS of "Server DNS1" and "server DNS2" has been set, you can not change it. (Factory default settings are: DNS1

= 211.136.17.107, DNS2 = 202.106.0.20).

3 "Master data center IP" uses the public IP network; so that the module is able to connect to IP address (if you use

the "main data center domain name" then the current item must be empty). Following figure:

Note: the public network IP address changes every day, so it needs to be updated.

4 "Main data center domain name," you can use software to application a domain name, by a third party to manage

the domain name, it is more convenient for user.

Note: The "main data center IP" must be set to empty when we use the domain name to connect.

5 "The port number of main data center ": The computer is Using "ARTServer.exe" applications required opening a

port number and the port number is set in the current item.

6 "Master data center mode" selects TCP mode.