User`s manual

A-GPRS1090I User’s Manual Version: 6.021
Chapter 3 Instruction of function configuration
Lead out configuration
It can save the information which had been changed.
Lead in configuration
It can on-load the information that you have saved before.
Rest the DTU mode
When use it; the mode will carry out software rest.
Restore factory settings
When use it, the mode will carry out restoring the factory settings.
DTUTYPE
DTUTYPE is the product device number, makes up with ten ASCII characters. This parameter only can be read, it has
been set up by the factory, so users can not change it.
DTUID
DTUID is the unique serial number, by this unique serial number, ARTServer can distinguish the module which has
connected. This unique serial number makes up with eight ASCII characters; users can change it to any meaningful
value.
SWVER
SWVER reflects the information about software version, it has been set up by the factory, so users can not change it. It
can supply more useful recommendations when users need technical support.
DTUNAM
It can distinguish different devices when multiple modules are being used. DTUNAM makes up with 15 characters.
PHON
This parameter need be configured by userself, it is not a parameter of system, so it will not affect the module operating
status. Server-side uses it to read mobile phone number, it makes up with 11 ASCII characters, such as “15810437433”.
MODE
14