User's Manual

8
Note: Your computer’s IP must be 192.168.1.xxx for connecting with Encoder. “xxx”
can be any number ranging from 0 to 255 except 251. Please make sure HEV-10W
Encoder should be in the same Network environment as your LAN IP.
6.1.2 Login for Configuration
Enter “192.168.1.251” in your browser to open the HEV-10W's Web administrator
page. Login with the default user name and password as “admin”. The default
language for web control is English, and other languages can be supported at the
same time, please choose according to your needs.
6.2 Wireless Connection
HEV-10W has two working modes on wireless connection, which are AP Mode
(Access Point) and Client Mode. For the first use, you need to use a mobile device to
connect and access HEV-10W in AP mode. You can add wireless router information to
HEV-10W, and then switch into Client Mode, HEV-10W can connect to the wireless