User's Manual

6
RTSP Streaming
Green light keeps on
Green light keeps on
Attempt to RTMP Streaming
Green light keeps on
Green light flashes slowly
Successful RTMP Streaming
Green light keeps on
Green light flashes quickly
WiFi Off
Off
Green light keeps on
Reset/ Reboot
Red light and green light flash
alternately
Red light and green light flash
alternately
Network Port Indicators
Green Light
Orange Light
Ethernet Cable Connected
Keeps on
/
Controlling the Web UI
Keeps on
Flashes slowly
Streaming
Keeps on
Flashes quickly
4.2 Configuration Button
One Button to Start and Stop Streaming: Click the Set button on the rear panel to start a
live, and click the Set button again to stop the live streaming.
WiFi Working Mode Switch: Hold down the Set button for about 3s to switch between
the WiFi working mode between AP and Client. The L1 orange light flashes slowly and
L2 green light keeps on indicate that the device is in AP mode; while the L1 green light
and L2 green light keep on means Client mode.
Factory Reset: Press and hold the Set button on the rear panel for about 15s till the red
light and green light flash alternately, then the HEV-10W will restore the factory
settings. All parameters will become the factory default parameters. The default IP
address of the HEV-10W is 192.168.1.251 (Wired) and 192.168.2.252 (Wireless in AP
Mode).
5.Typical Application