User's Manual

After a successful setting, multiple devices can use the URL: udp: //@239.255.17.19:

8541 to play the HEV-10W video stream, of which 239.255.17.19 is the "Destination

IP" filled in the HEV-10W webpage, 8541 "Port" filled in the HEV-10W website.

7.6 System

7.6.1 Device Information

This interface allows you to set your device name, upgrade the latest firmware, factory

reset, and change password.

Device Name: You can change the device name of your encoder.

Firmware Upgrade: For the latest firmware, please visit the DDMALL forum at

forum.ddmalltech.com.

Reboot: Restart the device and let the parameters take effect immediately.

Restore: Restore to factory default settings, but retain the customer’s network

settings.

Reset: To restore all parameters to factory default settings. You can also press the

Set button to restore the encoder (press the button for 15s till the indicator light

flashes alternately).

7.6.2 Change Password

To change your password from the default value “admin”, enter your desired

password in the “New Password” field and click “Apply”.