User's Manual

21
After the setting is successful, multiple devices can use URL1 or URL2 to play the
video stream. Note that when multiple devices are playing at the same time, it is best
to uniformly select the URL1 or URL2 address for playback, and it is best not to mix
the two at the same time.
7.5.3 UDP Unicast
In the webpage, select "Transport Stream", which allows HEV-10W to perform unicast
or multicast transmission using the UDP protocol. In the UDP unicast mode,
HEV-10W will always push the stream to a client with a specified IP. Except for this
client, other clients cannot play the HEV-10W video stream. Enter Destination IP,
enter the IP address of the specified client decoding device, and enter Port and TTL to
start the UDP unicast mode.