User's Manual

→WiFi Mode: Select “Access Point” mode.

Network Name (SSID): The SSID name of Network Name of the encoder in AP mode

can be customized and modified. The default network name is HEV-10W.

Password: The default password is 12345678 in AP mode. You can also change this

password.

Wireless Band: Select either 2.4G or 5G.

Channel: Select the WiFi signal channel.

→WiFi Mode: Select “Client” mode.

Network Name (SSID): This field allows you to enter or select an existing router’s

SSID for HEV-10W to connect to. Select the router you want to connect to in the

"Available WIFI Networks" list, if it does not appear in the list, please press the

"Refresh" button. If the SSID of your router is not visible, please fill it in manually.

Note: After you click the “Refresh” button, the encoder will disconnect from your

control device and search for the surrounding WIFI. Please wait for about 10s. When

the search is successful, you need to use your control device to connect to the SSID

of HEV-10W again and refresh the web page.

IP Mode

 Dynamic (DHCP) – The connected router generates an IP address for the

encoder. If you set it to DHCP, please login to the router to get the IP address that

it assigns to the HEV-10W.

 Static – Manually enter the IP address value for HEV-10W and your device in