User's Manual

12
Input Status: Display the resolution, sampling rate, and other information of the
current HDMI input video in real-time.
Encoding Type: Select either H.265 or H.264 compression formats.
Frame Rates: Adjusts the number of frames between full picture updates.
Key Frame Interval (GOP): It is used to modify the keyframe interval. Generally, we
recommend setting the Key Frame Interval (GOP) to twice the Frame Rate (FPS)
value.
Bit Rate: Allows you to select or enter different bit rates from 128kbps to 16Mbps.
Lower bit rates require less bandwidth and may allow for a more stable stream while
higher bit rates offer better video quality, but require more network bandwidth. It
should be noted that if you use the wireless method for streaming, the maximum bit
rate only supports 8M.
Output Resolution: To set the output resolution of video encoding/ live streaming.
Compression Profile: Select the video compression curve mode. There are three
types of video compression curves: BaseLine, Main, and High.
Bitrate Control: Select the mode to control the bit rate. There are four modes: VBR,
CBR, AVBR, and FixQP. The default CBR mode is recommended.
7.2.2 OSD Setting
OSD settings provide two Text OSD settings and a Picture OSD setting.
Step: Click “Video” → “OSD Setting” → Configure your settings → Click “Apply”.
Text Settings