User's Manual

9
router and perform video transmission. Please find the specific instructions below.
Step 1: Open your wireless networking utility on your laptop or mobile devices to
search SSID called “HEV-10W” and access to it by the password “12345678”. This
step is only required in AP WiFi mode.
Step 2: Then open a web browser and enter the IP address for HEV-10W wireless
network connection. In AP mode, the default IP address is “192.168.2.252”.
Step 3: Login to the interface with the default user name and password as “admin”.
*User name: admin *Password: admin
Step 4: Navigate to Network Configuration interface, and choose the WiFi Mode as
Client under Wireless. Then enter or select an existing router’s SSID for HEV-10W to
connect to. Select the router you want to connect to in the "Available WIFI Networks"
list, if it does not appear in the list, please press the "Refresh" button. If the SSID of
your router is not visible, please fill it in manually.
Note: After you click the “Refresh” button, the encoder will disconnect from your
control device and search for the surrounding WIFI. Please wait for about 10s. When
the search is successful, you need to use your control device to connect to the SSID
of encoder again and refresh the web page.