User Manual

Development Environment
The demo controller, including regular tags (data containers) and counters, is used
to design and test a project directly on the development PC without connection to
an external controller.
Internal tags that work like controller tags, but are independent of an external
controller, can be defined.
It is also possible to connect to an external OPC server.
The controller can be changed later by clicking the Controller button on the
Controllers tab of the tags configuration page.
A project can connect to more than one controller.
Note:
OPCClassicisnotsupportedfor X2control,X2 motion,X2marine andX2proseries(OPC
Classicis nolongersupportedbyMicrosoftCompact2013).
Relatedinformation
Controller
DEMO Controller
InternalTags
ExternalOPC Server
Multiple Controllers
SelectLocation
The Select Location
dialog controls naming of the project and where project files
are saved in the comp
uter environment.
BeijerElectronics, MAEN831P
39