User Manual

Text Li b ra r y

19 TextLibrary

With the text library function, text tables can be created, where values are linked

to texts. The text library function can be used for presentation of each sequence

step in sequence control. Another possible applica tion is to present error codes,

where an analog signal generates error codes connected to texts in a text library.

The function can also be used to give analog values speciﬁc values, depending on

the selected texts.

The text library function is activated by selecting it from the Insert ribbon tab.

Texts and groups can be added from the Add button.

It is also possible to add start and end values for each message, that makes the text

in the connected object change depending on the value of the tag.

Note:

TheStartValueandEnd Valuecanonlybegivenasintegers. Thiscouldresultin

problemsupdatingthetextwhen theinputvalueisenteredwithdecimals,especially if

theinputvaluejumpsinandoutofthegivenrange. Ifthisisthecase,usetheConﬁgure

Text functioninstead. ThisisavailableundertheGeneraltabwhentheobjectis

selected.

Note:

Adefaulttextthathasbeenentered in Conﬁgure Textwill notbepresentedoutside

arangethathasbeendeﬁnedinthe TextLibrary.Inthiscase,useConﬁgure Textto

deﬁnealltextpresentationsfortheobject.

Relatedinformation

HMI Controls

BeijerElectronics, MAEN831P

345