User Manual

Foreword

ReferencemanualforiXDeveloper

Foreword

The iX Developer software is used to conﬁgure iX panels and PC operated control

applications, including applications for IPCs (Industrial PCs).

The iX Developer makes it easy to create logical, ﬂexible and effective HMI

applications that provide the right information on the right occasion to operators

and to other systems.

This manual describes the conﬁguration software in detail.

Please see the iX Developer User’s Guide (MAEN832x) for function-based

descriptions.

The manual assumes that the most recent versions of the system program (image)

and iX Developer are used.

For speciﬁc details of a c onnected controller refer to the help ﬁle for the controller

driver. The function of a project application in an operator panel is not affected by

thechoiceofcontroller.

The information in this manual is also available by pressing F1 while using iX

Developer.

The present revision of this manual is valid for version 2.20 SP2 of iX Developer.

Order no: MAEN831P

The information in this document is subjectto change without notice and is provided as available at the

time of printing. Beijer Electronics AB reserves the right to change any information without updating this

publication. Beijer Electronics AB assumes no responsibility for any errors that may appear in this docum ent.

All examples in this document are only intended to improve understanding of the functionality and handling

of the equipment. Beijer Electronics AB cannot assume any liability if these examples are used in real

applications.

In view of the wide range of applications for this software, users must acquire sufﬁcient knowledge themselves

in order to ensure that it is c orrectly used in their speciﬁc application. Persons responsible for the application

and the equipment must themselves ensure that each application is in compliance with all relevant

requirements, standards, and legislation in respect to conﬁguration and safety. Beijer Electronics AB will

accept no liability for any damage incurred during the installation or use of equipment mentioned in this

document. Beijer Electronics AB prohibits all modiﬁcation, chang es, or conversion of the equipment.

BeijerElectronics, MAEN831P