User Manual

Ribbon Tabs
Position coordinates on the screen are given in pixels of the screen resolution. The
position 0,0 corresponds to the upper left corner of the screen.
To move an object vertically when a tag value changes:
1.
Draw and position the object at the start position. Keep the object selected.
2.
Click on Move ontheDynamicstabtoopentheMoveDynamicsEditor.
3.
Select the tag to control the movement.
4.
Enter a start and end value for the tag.
Start and end positions are suggested based on the current start position. A
ghost object will appear at the suggested finish position. A guide line that
connects the center of the original object with the ghost object appears.
5.
Move the ghost object in the screen to its fin al position.
The coordinates for the object is updated. An animation of the move appears
on the screen. Coordinate values can also be updated directly in the numerical
fields (End Top, End Left). The coordinates for start and finish will limit the
movementoftheobjectirrespectiveifthetagvalueisoutsideitsstartandend
value.
6.
Click OK to save and close the Move Dynamics Editor.
When Position or Size dynamics is applied, moving or resizing of the object will
be disabled. A lock icon resembling a chain in the upper left corner of the object
(when selected) indicates that the object has a dynamic control applied and that
it cannot be moved or resized.
Size
TheSizecontrolintheSizegroupchangesanobject’ssize,basedonatagvalue.
252
BeijerElectronics, M AEN831P