User Manual

Ribbon Tabs

Select to automatically turn off the backlight after a certain number of seconds,

and whether to keep the backlight on if a notiﬁer window (e.g. alarm indicator or

communication error message) is visible.

Backlight settings are supported only for operator panel targets. For other targets,

the Microsoft Windows screen saver may be used.

8.3.4 SerialPortsGroup

For each of the COM ports, select if it is to be conﬁgured as an RS232, RS422 or

RS485 port. Only available when an operator panel is selected as target.

The number of a vailable ports and possible conﬁguration differ depending on

selected target.

For Panel iX TxA, X2 base, iX TxB, iX TxC and IPC, four COM ports can be

conﬁgured:

Port Description Labelonbackofpanel

COM1 RS232incl. CTS/RTS

COM2 RS422orRS485

Port 1

COM3 RS232excl. CTS

COM4 RS422incl. RTSorRS485

Port 2

For Panel , , three COM ports can be conﬁg

ured:

Port Description Labelonbackofpanel

COM1 RS232incl. CTS/RTS

COM2 RS422orRS485

COM3 RS485(onlyif COM2isRS485)

Port 1

For Panel T7BR, T15BR and T15BM, two COM ports can be conﬁgured:

Port Description Labelonbackofpanel

COM1 RS232incl. CTS Port1

COM2 RS422orRS485 Port2

BeijerElectronics, MAEN831P

241