User Manual

Ribbon Tabs
Parameter Description
automatic thedownloadoftheprojectautomaticallystarts,
withoutanydial ogs, whenaprojectfileisloaded to
thestoragedeviceandthepanelis rebooted
path"\Storage
Card\Pro ject3"
thepathtotheproject, ifmultipleprojects are
storedonthe storagedevice. SDcardsusethepath
\StorageCard\anddevicesattachedto USBuse
\HardDisk\
applyipsettings appliessavedIPsettings
deletesource deletesthesource file fromthestoragedeviceafter
thedownload
deleteconfigfile deletes theconfigurationfileafterthedownload. If
theconfigurationfileis left onthestoragedeviceitis
initiatedeach timethepanelisrebooted.
Note:
Thisisonlysupportedinthe latestreleasedimages.
Example:
Inthefollowingexample,withoutdisplayinganydialogs,theprojectfoundinthe
folderProject_5locatedontheUSBstickisloaded,theprojectisdeletedfromtheUSB
stick,and theconfigurationfileisdeleted. TheIP-settingsarenotupdated.
• automatic
• path"\HardDisk\Project_5"
• #applyipsettings
• deletesource
• deleteconfigfile
UploadDatabase
The Upload Database command will collect the database from an operator panel
in the network environment to a file on the development PC. The panel will pause
during the upload, and will be started automatically afterwards.
The database may only be collected from a panel running the same project (i.e.
aprojectwiththesamenameandofthesamesize)asthecurrentiXDeveloper
project.
CollectingaDatabasefromanoperator panel
1.
Connect the operator panel to the development PC via an Ethernet
connection.
2.
Click Upload Database.
3.
The Upl
oad Database dialog opens and all panels connected in the network
are lis
ted with information about IP address and panel type. Select the panel to
colle
ct from in the list.
4.
Check that the IP address is correct and click Back Up.
5.
Select location of the saved database.
228
BeijerElectronics, M AEN831P