User Manual

The Configuration Tool
Alternatively, select to continue using a trial version of the software. You may
evaluate iX Developer with full functionality for 30 days. When the evaluation
period has expired, it will still be possible to use the software, but the functions in
the Run and Transfer groups will be disabled.
Note:
IfyouhavealreadyusedaDemoversionofiXDeveloper for 30 days, you will not be
issuedanother30daysfor evaluation.
ProjectSize
The project size is shown in the lower right of the desktop area when designing an
operator panel project. The size was calculated at the latest validation.
1.1.5 Installation
The iX Developer software is supplied on a USB stick. When connecting the USB
stick to the USB port, the installation starts automatically. Follow the instructions
to install iX Developer. If the installation does not start, run the setup.exe file.
The installation creates an icon for iX Developer in the group named iX
Developer.
Click on Start/All Programs/iX Developer 2.20/iX Developer 2.20 to start iX
Developer.
Note:
TheiXDevelopermustbe installedonadevelopmentPC,aniXTxCtargetcannotbe
usedtodevelopprojects.
InstallationofiXRuntime
To install iX Runtime on a PC, insert the iX Developer USB stick and select to
install iX Runtime. To run the program, a dongle is required that is supplied by
Beijer Electronics.
Note:
iXDevelopercannotberunonthesamePCasiXRuntime.
Note:
WhenusingiXRuntimeonaPC itisrecommendedtouninstallapreviousiXRuntime
beforeinstallinga new version.
BeijerElectronics, MAEN831P
19