User Manual

Ta g s
10.
Run the project, enter values for the objects connected to D11–D13 and
D21–D23, and select the different motors using the ComboBox.
4.10.2 UsingIndexRegistersforStation
Handling
For some controllers, it is possible for the operator to define from which controller
station to read or write values. The station number is given as a prefix to the
controller address.
This is stated either as a fixed number or as an ind
ex register. The default station is
the station addressed without using a prefix. T
he other stations can be addressed
either as a fixed number or as an index register
.Withfixedstationnumbers,an
object is always connected to the same contr
olleraddress,andonlythevalueofthis
controller address can be used in the o
bject.
Index addressing reduces the number of tags needed as well as the number of
objects to be configured in the iX Developer project when showing values from /
writing to multiple controller stations.
The syntax when using index regist
ers for station handling is for example I1:D10.
BeijerElectronics, MAEN831P
115