User Manual

Ta g s
Relatedinformation
UsingIndex Registersfor StationH andling
4.10 IndexRegisters
With index addressing, it is possible for the operator to select from which tag an
object is to collect the shown value. Without index addressing an object is always
connected to the same controller address, and only the value of this address can
beshownintheobject.
Which tags to use for indexing are defined on the Index Registers tab of the tags
configuration page. Up to eight different index registers can be used for each
controller, and each index register can be used for more than one object. Index
registers can be connected to any tag in the global tag list, but the tag has to be
selected for each controller.
BeijerElectronics, MAEN831P
111