User Manual

Command Reference
38 Elektronik-Systeme Lauer, MAEN976
Response Message (Acknowledge)
Maximum Lr for this Command
13
Example 1
Set the main signal source of monitor MT226 at address 0.15 (group 0, address 15)
to “DVI” (which is ASCII “19” with ASCII-codes 0x31 0x39):
Monitor MT226 at address 0.15 (group 0, address 15) has acknowledged the new
main signal source “DVI” (0x31 0x39):
Example 2
Decrement the main signal source of monitor MT226 at address 0.15 (group 0,
address 15):
Monitor MT226 at address 0.15 (group 0, address 15) has returned the new main
signal source “VGA” (which is ASCII “17” with ASCII-codes 0x31 0x37):
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x06 ADR 0x4D 0x43 0x43 LEN ICHKH 0x98 Param Ret ICHKD
Ret
Value: “02”: VIDEO1
“03”: VIDEO2
“05”: SVIDEO1
“08”: CMPT1
“18”: SD-RGB
“0A”: COMP3
“17”: VGA
“19”: DVI
“1B”: HD-SDI
Type: Two-digit ASCII-encoded hexadecimal number
Length: 2
Description: Current video signal source
0 1 2 3 4 5 6 7...9 10
0x07 0x0F
0x4D 0x43 0x43 0x03 0x13 0x98 0x31 0x39 0xFD
0 1 2 3 4 5 6 7...11 12
0x06 0x0F
0x4D 0x43 0x43 0x05 0x1A 0x98 0x31 0x39 0x31 0x39 0x93
0 1 2 3 4 5 6 7...8 9
0x07 0x0F
0x4D 0x43 0x43 0x02 0x14 0x98 0x2D 0x3A
0 1 2 3 4 5 6 7...10 11
0x06 0x0F
0x4D 0x43 0x43 0x04 0x13 0x98 0x2D 0x31 0x37 0xD2