Owner's manual

Interface Configuration
Beijer Electronics, MAEN975 7
1 Interface Configuration
A command can be sent either using the serial interface (RS232 or RS485) or the
Ethernet interface via UDP.
This is the default configuration for the two interfaces:
Although the Beijer Electronics MT230 Nautic Monitor supports serial port data
transfer speed at different rates and configurable UDP ports for the Ethernet com-
munication, the given default configuration should be used for compatibility issues.
Interface type Default configuration
Serial (RS232 or RS485) 9600 bits/second, 8 data bits, 1 start bit, 1 stop bit
Ethernet UDP receive port 10000, UDP send port 10001
Related information
Ethernet Communication