Owner's manual

Command Reference
54 Beijer Electronics, MAEN975
6.19 LAU_CONFIG_GETIFNAME (0x0103)
Internal Network Interface Name
Returns the internal network interface name.
Supported since Firmware Version
MT230 Nautic Monitor: 1.0
Command Stream
Response Message (Acknowledge)
Response Message (Negative Acknowledge)
Under normal operation conditions, a device never sends a negative acknowledge in
response to this command.
Maximum Lr for this Command
16
Example
Get the internal network interface name of monitor at address 0.7 (group 0, address
7):
According to the data returned by the monitor at address 0.7 (group 0, address 7),
the monitor’s internal network interface is named “eth0”:
0 1 2 3 4 5 6 7...8 9
0x07 ADR
0x4C 0x41 0x55 0x02 ICHKH 0x01 0x03 ICHKD
0 1 2 3 4 5 6 7...7+[LEN]-1 7+[LEN]
0x06 ADR
0x4C 0x41 0x55 LEN ICHKH Ret ICHKD
Ret
Value: ASCII characters
Type: String
Length: 0...8
Description: ASCII-string containing the network interface name
0 1 2 3 4 5 6 7...8 9
0x07 0x07
0x4C 0x41 0x55 0x02 0x0D 0x01 0x03 0xFB
0 1 2 3 4 5 6 7...10 11
0x06 0x07
0x4C 0x41 0x55 0x04 0x0C 0x65 0x74 0x68 0x30 0x8E