Manual

Safety Precautions
Beijer Electronics, MAEN956 7
1.3 During Installation
– The monitor is designed for stationary installation on a plane surface, where
the following conditions are fulfilled:
• no high explosive risks
• no strong magnetic fields
• no direct sunlight
• no large, sudden temperature changes
– Install the monitor according to the accompanying installation instructions.
– Ground the monitor according to the accompanying installation instruc-
tions.
– Only qualified personnel may install the monitor.
– Separate the high voltage, signal and supply cables.
– Make sure that the voltage and polarity of the power source is correct before
connecting the monitor to the power outlet.
– Peripheral equipment must be appropriate for the application and location.
– The controlling transformer has to comply with EN60742.
1.4 During Use
– Keep the monitor clean.
– Emergency stop and other safety functions may not be controlled from the
monitor.
– Do not use too much force or sharp objects when touching the keys, touch
screen etc.